AC-204AYILY-70-A Datasheet, PDF (13/17 Pages) ZETTLER Electronics – SPECIFICATIONS FOR LCD MODULE

12 QUALITY AND RELIABILITY
12.1 TEST CONDITIONS
Tests should be conducted under the following conditions :
Ambient temperature : 25 ± 5°C
Humidity
: 60 ± 25% RH.
12.2 SAMPLING PLAN
Sampling method shall be in accordance with MIL-STD-105E, inspection level II,
normal inspection, and single sampling plan tables for normal, tightened, and reduced
inspection.
12.3 ACCEPTABLE QUALITY LEVEL
A major defect is defined as one that could cause failure to or materially reduce the
usability of the unit for its intended purpose. A minor defect is one that does not materially
reduce the usability of the unit for its intended purpose or is an infringement from established
standards and has no significant bearing on its effective use or operation.
12.4 APPEARANCE
An appearance test should be conducted by human sight at approximately 30 cm
distance from the LCD module under flourescent light. The inspection area of LCD panel
shall be within the range of following limits.
2005/8/25
AMPIRE CO., LTD.
13