PSN1720A_07 Datasheet, PDF (2/2 Pages) Z-Communications, Inc – PHASE LOCKED LOOP

LOW COST - HIGH PERFORMANCE
PHASE LOCKED LOOP
VCO TUNING CURVE, typ.
TUNING VOLTAGE (Vdc)
VCO POWER CURVE, typ.
PSN1720A
PAGE 2
70 ^°c
25 ^°c
0 ^°c
25 ^°c
PLL
415-0078 REV. F
(DRAWING NOT TO SCALE)
0.000 ^-0.025
0.148
0.321
0.495
0.668
0.841 ^0.816
BOTTOM
SEE DETAIL A
SEE DETAIL B
FREQUENCY (MHz)
PHYSICAL DIMENSIONS
14 13 12
0.140
1
11
2
10
3
9
4
8
5
6
7
P1 RF OUTPUT
P2 GROUND
.032
P3 REFERENCE OSCILLATOR INPUT
P4 CLOCK
P5 DATA
P6 LOAD ENABLE
P7 LOCK DETECT
P8 VCC
P9 OPTIONAL
P10 NO CONNECTION
P11-14 GROUND
DETAIL A
TABS RANGE:
SEE NOTE 5.
(4 PLACES)
.070
.015
.030
DETAIL B (TYP)
© Z-Communications, Inc.
Page 2
NOTES:
1. THE INSIDE RADIUS OF ALL 14 HALF HOLES
AT THE PERIMETER OF THE BOARD ARE
PLATED TO PROVIDE A SURFACE FOR THE
ATTACHMENT OF THE PLL MODULE TO A PCB,
IN 11 LOCATIONS, WITH 3 PADS BEING
USED FOR ELECTROMECHANICAL INTERFACE.
14 SOLDER LOCATIONS REQUIRED.
2. THE SURFACE OF THE SHIELD IS TIN PLATED
AND MAY BE SOLDERED TO. THE SHIELD'S
BASE METAL IS COLD ROLLED STEEL.
3. THE GROUND PLANE IS GROUND AND ATTACHES
TO A GROUND TRACK ON THE UPPER SIDE OF
THE BOARD AS WELL AS THE SHIELD BY PTH.
4. UNLESS OTHERWISE NOTED ALL DIMENSIONS
ARE IN INCHES.
5. UNLESS OTHERWISE NOTED ALL TOLERANCES
ARE AS FOLLOWS:
TOLERANCES
.XXX= ± .010
Printed in the U.S.A.