MT91L62 Datasheet, PDF (1/19 Pages) Mitel Networks Corporation – ISO2-CMOS 3 Volt Single Rail Codec

MT91L62
ISO² - CMOS 3 Volt Single Rail Codec
Data Sheet
Features
• Single 2.7-3.6 volt supply
• Programmable µ−law/A-law Codec and filters
• Fully differential to output driver
• SSI digital interface
• Individual transmit and receive mute controls
• 0 dB gain in receive path
• 6 dB gain in transmit path
• Low power operation
• ITU-T G.714 compliant
Applications
• Cellular radio sets
• Local area communications stations
• Line cards
• Battery operated equipment
July 2004
Ordering Information
MT91L62AE
MT91L62AS
MT91L62AN
20 Pin Plastic DIP (300 mil)
20 Pin SOIC
20 Pin SSOP
-40°C to +85°C
Description
The MT91L62 3 V single rail Codec incorporates a
built-in Filter/Codec, transmit anti-alias filter, a
reference voltage and bias source. The device
supports both A-law and µ-law requirements. The
MT91L62 is a true 3 V device employing a fully
differential architecture to ensure wide dynamic range.
An analog output driver is provided, capable of driving
a 20 k ohm load.
The MT91L62 is fabricated in Zarlink's ISO²-CMOS
technology ensuring low power consumption and high
reliability.
VDD
VSSA
VBias
VRef
Din
Dout
STB
CLOCKin
PCM
Serial
Interface
FILTER/CODEC GAIN
ENCODER 6dB
DECODER 0 dB
Analog
Interface
Timing
Control
PWRST IC
A/µ CSL0 CSL1 CSL2 RXMute TXMute
Figure 1 - Functional Block Diagram
1
Zarlink Semiconductor Inc.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright 1999-2004, Zarlink Semiconductor Inc. All Rights Reserved.
AIN+
AIN-
AOUT +
AOUT -