FR-07IK20L Datasheet, PDF (4/9 Pages) YAGEO Corporation – GENERAL PURPOSE CHIP RESISTORS

Chip Resistor Surface Mount ^{RC SERIES 0805 (RoHS Compliant)}
Product specification 4
9
MARKING
RC0805
Fig. 1
03
YNSC001
Value=10 KΩ
E-24 series: 3 digits
First two digits for significant figure and 3rd digit for number of zeros
Fig. 2
00
YNSC004
Value=10 KΩ
Both E-24 and E-96 series: 4 digits
First three digits for significant figure and 4th digit for number of zeros
For further marking information, please see special data sheet “Chip resistors marking”
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Ni-
barrier) are added. See fig.3
DIMENSIONS
Table 1
TYPE
L (mm)
W (mm)
H (mm)
I₁ (mm)
I₂ (mm)
RC0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
OUTLINES
For dimension see Table 1
H
I2
I₁
W
L
Fig. 3 Chip resistor outlines
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
ceramic substrate
overcoat
YNSC066
Jun 16, 2009 V.4
www.yageo.com