AC0201DR-071R Datasheet, PDF (4/12 Pages) YAGEO Corporation – THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE

Chip Resistor Surface Mount ^{AC SERIES 0201 to 2512}
Product specification 4
12
CONSTRUCTION
The resistors are constructed on top of an automotive grade ceramic body. Internal metal electrodes are added at
each end and connected by a resistive glaze. The resistive glaze is covered by a lead-free glass.
The composition of the glaze is adjusted to give the approximately required resistance value and laser trimming of this
resistive glaze achieves the value within tolerance. The whole element is covered by a protective overcoat. Size 0603 and
bigger is marked with the resistance value on top. Finally, the two external terminations (Ni / matte tin) are added, as
shown in Fig.8.
OUTLINES
YNSC088
Fig. 8_1 Chip resistor outlines
marking layer
overcoat
protective glass
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
inner electrode
ceramic substrate
YNSC088_1
marking layer
overcoat
protective glass
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
inner electrode
ceramic substrate
Fig. 8_2 AC2010/ 2512 double power chip resistor outlines
DIMENSIONS
Table 1 For outlines, please refer to Fig. 9
TYPE
L (mm)
AC0201
0.60± 0.03
AC0402
1.00 ± 0.05
AC0603
1.60 ± 0.10
AC0805
2.00 ± 0.10
AC1206
3.10 ± 0.10
AC1210
3.10 ± 0.10
AC1210 7W
3.10 ± 0.10
AC1218
3.10 ± 0.10
AC2010
5.00 ± 0.10
AC2512
6.35 ± 0.10
W (mm)
0.30± 0.03
0.50 ± 0.05
0.80 ± 0.10
1.25 ± 0.10
1.60 ± 0.10
2.60 ± 0.15
2.60 ± 0.15
4.60 ± 0.10
2.50 ± 0.15
3.10 ± 0.15
H (mm)
0.23± 0.03
0.32 ± 0.05
0.45 ± 0.10
0.50 ± 0.10
0.55 ± 0.10
0.50 ± 0.10
0.55 ± 0.10
0.55 ± 0.10
0.55 ± 0.10
0.55 ± 0.10
I1 (mm)
0.12± 0.05
0.20 ± 0.10
0.25 ± 0.15
0.35 ± 0.20
0.45 ± 0.20
0.45 ± 0.15
0.45 ± 0.15
0.45 ± 0.20
0.55 ± 0.15
0.60 ± 0.20
I2 (mm)
0.15± 0.05
0.25 ± 0.10
0.25 ± 0.15
0.35 ± 0.20
0.40 ± 0.20
0.50 ± 0.20
0.50 ± 0.20
0.40 ± 0.20
0.50 ± 0.20
0.50 ± 0.20
For dimension, please refer to Table 1 AC0201/0402
0603/0805/1206/1210/
2010/2512
AC1218
Side view for all type
Fig. 9 Chip resistor dimensions
Nov. 02, 2016 V.5
www.yageo.com