AC0402BRE0710R Datasheet, PDF (3/7 Pages) YAGEO Corporation – THICK FILM CHIP RESISTORS Automotive Precision grade

Chip Resistor Surface Mount ^{AC SERIES 0402 to 1206}
Product specification 3
7
MARKING
AC0805 / AC1206
Fig. 1 Value = 10 kΩ
AC0603
Fig. 2 Value = 12 kΩ
Either resistance in E-24 or E-96: 4 digits
First three digits for significant figure and 4th digit for number of zeros
E-24 series: 3 digits
First two digits for significant figure and 3rd digit for number of zeros
Fig. 3 Value = 12.4 kΩ
AC0402
E-96 series: 3 digits for 0603±1% EIA-96 marking method
No marking
Fig. 4
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistors are constructed out of a high-grade ceramic
body. Internal metal electrodes are added at each end and
connected by a resistive layer. The resistive layer is adjusted
to give the approximate required resistance and laser cutting
of this resistive layer that achieves tolerance trims the value.
The resistive layer is covered with a protective coat and
printed with the resistance value. Finally, the two external
terminations (matte tin) are added. See fig. 5.
OUTLINES
For dimension see Table 1
DIMENSION
Table 1 For outlines see fig. 5
TYPE
L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
AC0402 _{1.00 ± 0.05 0.50 ± 0.05 0.32 ± 0.05 0.20 ± 0.10 0.25 ± 0.10}
AC0603 _{1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.25 ± 0.15 0.25 ± 0.15}
AC0805 _{2.00 ± 0.10 1.25 ± 0.10 0.50 ± 0.10 0.35 ± 0.20 0.35 ± 0.20}
AC1206 _{3.10 ± 0.10 1.60 ± 0.10 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20}
Fig. 5 Chip resistor outlines
Mar. 14, 2016 V.0
www.yageo.com