CC1808KKX7REBB102 Datasheet, PDF (12/16 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Surface-Mount Ceramic Multilayer Capacitors
High-Voltage
NP0/X7R
Product specification 12
16
1 KV to 3 KV
SOLDERING RECOMMENDATION
Table 7
SOLDERING
METHOD
SIZE
0402
Reflow
≥ 0.1 µF
Reflow/Wave
< 0.1 µF
0603
≥ 1.0 µF
< 1.0 µF
0805
≥ 2.2 µF
< 2.2 µF
1206
≥ 4.7 µF
< 4.7 µF
≥ 1210
Reflow only
---
TESTS AND REQUIREMENTS
Table 8 Test procedures and requirements
TEST
TEST METHOD PROCEDURE
Mounting
IEC 60384- 4.3
21/22
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
Visual
Inspection and
Dimension
Check
4.4 Any applicable method using × 10 magnification
REQUIREMENTS
No visible damage
In accordance with specification
Capacitance
Dissipation
Factor (D.F.)
4.5.1 Class 1:
f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 V_rms at 20 °C
f = 1 KHz for C > 1 nF, measuring at voltage 1 V_rms at 20 °C
Class 2:
f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 V_rms at 20 °C
Within specified tolerance
4.5.2 Class 1:
f = 1 MHz for C ≤ 1 nF , measuring at voltage 1 V_rms at 20 °C
f = 1 KHz for C > 1 nF, measuring at voltage 1 V_rms at 20 °C
Class 2:
f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 V_rms at 20 °C
In accordance with specification
Insulation
Resistance
Temperature
Coefficient
4.5.3 U_r ≤ 500 V: At Ur for 1 minute
U_r > 500 V: At 500 V for 1 minute
4.6 Class 1:
Between minimum and maximum temperature
NP0: -55 °C to +125 °C
Normal Temperature: 20 °C
In accordance with specification
C/C:
Class 1:
NP0: ±30 ppm/°C
Temperature
Characteristic
Class 2:
Between minimum and maximum temperature
X7R: -55 °C to +125 °C
Normal Temperature: 20 °C
Class 2
X7R: ±15%
Aug 08, 2011 V.4
www.yageo.com