E02 Datasheet, PDF (7/7 Pages) XP Power Limited – ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS

BLOCK DIAGRAM
E SERIES
(+) In
(-) In
Oscillator
Transformer
Rectifier &
Multiplier
(+) Output
Center tap (for Dual output option)
(-) Output
POLARITY
OPTIONS
OPTION CODE TABLE
OPTION
Positive / Negative reversible
Dual Output (center tap) option
Shielding and Mounting Enclosure
ORDER CODE
Blank
CT
AB
MODELS
ALL
ALL
ALL
HOW TO ORDER
PART NUMBER SELECTOR:
Model Number:
E10CTAB
Model
Output Voltage (See table)
Shielding & Mounting Enclosure (Optional)
Center Tap (for dual output option)
EXAMPLE:
E10CTAB (E-Model, 10-Output Voltage, CT-Center Tap, AB-Shielding & Mounting Enclosure)
* Notes:
1. At maximum rated output voltage.
2. Output voltage is load dependent. Under light or no load conditions, reduce input voltage so maximum rated output voltage is not exceeded.
3. Specifications after 30 minute warm up, full load, at 25C unless otherwise indicated.
4. For dual output units [CT option], the negative output voltage will be ~10% larger than the positive output voltage with respect to the center tap pin.
5. Ripple Specifications for dual output units applies to the voltage between the positive and negative output terminals.
6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output.
7. This unit has flying leads on the output and clearance holes for mounting.
XP EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product
changes. “Copy-exact” options are available. Please contact an XP EMCO sales representative for more details.
WWW.XPPOWER.COM
4719BH03
PAGE 7