ECC Datasheet, PDF (2/2 Pages) XP Power Limited – 100 W - Baseplate Cooled

Models and Ratings
ECC100
Output Power
100 W
100 W
100 W
100 W
100 W
Output Voltage V1
12.0 VDC
15.0 VDC
24.0 VDC
28.0 VDC
48.0 VDC
Output Current V1
8.1 A
6.5 A
4.1 A
3.5 A
2.0 A
Standby Supply V2
5.0 V/0.5 A
5.0 V/0.5 A
5.0 V/0.5 A
5.0 V/0.5 A
5.0 V/0.5 A
Model Number⁽¹⁾
ECC100US12
ECC100US15
ECC100US24
ECC100US28
ECC100US48
Notes
1. For optional surge filter add suffix ‘-F’ to model number, e.g. ECC100US12-F. See longform datasheet for further details and mechanical drawings.
2. Add suffix -S for screw terminals, consult sales for restrictions and availability.
Mechanical Details
5 x M3 clearance holes
4 x M3-0.5
0.25 Faston
Ground tab
1
J1
2
21
J3
10 9
8 2 x 3.70
(94.0)
J2
1
4.10
(104.1)
3.30
(83.8)
Voltage Adj.
2 x 0.20 (5.1)
2 x 0.23
(5.8)
2.30 (58.4)
2 x 4.60 (116.8)
3 x 0.20
(5.1)
0.40
(10.2)
Mounting surface
marked with “A”
1.55
(39.4)
4.10
(104.1)
3.30
(83.8)
5.00 (127.0)
0.40
(10.2)
Screw Terminal Side View
Output Connector J2
Molex PN 09-65-2088
Pin
Single Output
1
+V1
2
+V1
3
+V1
4
+V1
5
RTN
6
RTN
7
RTN
8
RTN
J2 mates with Molex housing PN
09-50-1081 and both with Molex
series 5194 crimp terminals.
Notes
1. All dimensions in inches (mm).
2. Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25)
Input Connector J1
Molex PN 09-65-2038
1
Line
2
Neutral
J1 mates with Molex housing
PN 09-50-1031.
Signal Connector J3
Molex PN B10B-PHDSS
1
+5 V Standby
2
Logic GND
3
Logic GND
4
Power OK
5
Inhibit Hi
6
Inhibit Lo
7
+Sense
8
-Sense
9
+Vout
10
-Vout
J3 mates with JST housing PN
PHDR-10VS and with
JST SPHD-001T-P0.5 crimp terminals.
3. Weight 1.2 lbs (550 g)
Thermal Considerations
The baseplate must be maintained below +85 °C and therefore a suitable heatsink must be selected to remove the heat from the power supply. Details of heatsink
calculations and other considerations can be found in the longform datasheet.
08-April-14