AMM150PS12 Datasheet, PDF (2/2 Pages) XP Power Limited – AC-DC Power Supplies

Models and Ratings
AMM150
Output
Power
132 W
144 W
150 W
150 W
150 W
150 W
Output
Voltage
12 V
15 V
19 V
24 V
27 V
48 V
Output
Current
11.00 A
9.60 A
7.90 A
6.25 A
5.56 A
3.13 A
Total
Regulation⁽²⁾
5%
5%
5%
5%
5%
5%
Model
Number^(5,6)
AMM150PS12
AMM150PS15
AMM150PS19
AMM150PS24⁽³⁾
AMM150PS27⁽³⁾
AMM150PS48⁽³⁾
Notes
1. Ripple and noise measured at 20 MHz bandwidth with a 10 µF tantalum and 0.1 µF ceramic capacitor connected at the measurement point.
2. Total regulation includes set accuracy, line and load regulation.
3. For optional barrel jack connector, add suffix ‘B1’ to the model number e.g. AMM150PS24B1.
4. Efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%. Models with output voltage of 15 V
and higher have 87% minimum.
5. For optional AC cable restraint on the Class I Version, add suffix ‘A’ to the model number e.g. AMM150PS24A or AMM150PS24B1A. AC mains
lead must be Interpower Corporation, part number: 70006020300. Optional AC cable restraint is not available on the Class II Version.
6. For Class II Versions, and ‘C2’ to model number, eg. AMM150PS24C2
Mechanical Details
Cable length approx 48” (1219 mm)
13
1.96
(49.7)
Rubber foot
(4 places.)
Power On Indicator
24
Pin
Function
1
Return
2
Output+
3
Return
4
Output+
8.17
(207.6)
3.23 (82.0)
Optional Barrel Jack Connector
0.433 (11.0)
0.217
(5.5)
AC Input
IEC 320/C14 Inlet - For Class I Version
IEC 320/C18 Inlet - For Class II Version
Notes
1. Dimensions shown in inches (mm). Tolerance is 0.02 (0.5) maximum, except output cable length.
2. Weight: 2.16 lbs (980 g).
3. Output connector is KYCON KPPX-4P. For mating half use KYCON KPJX-4S-S or equivalent.
4. For Class I versions shell is connected to ground. For Class II Versions shell is capacitively coupled to input.
0.083 (2.1) 0.413
(10.5)
02-Dec-08