|
AMM150PS12 Datasheet, PDF (1/2 Pages) XP Power Limited – AC-DC Power Supplies | |||
|
150 Watts
AMM150 Series
xppower.com
⢠Energy Star Level V â¥15 V
⢠CEC 2008 & EISA2007 Compliant
⢠Worldwide Medical Approvals
⢠Class I and Class II Versions
⢠Optional AC Cable Restraint
⢠Optional Output Connectors
⢠Low Leakage Current
Specification
Input
Input Voltage
⢠90-264 VAC
Input Frequency
⢠47-63 Hz
Input Current
⢠2 A rms at 115 VAC,
1 A rms at 230 VAC
Earth Leakage Current ⢠90 µA max at 115 VAC/60 Hz,
(Class I Versions)
150 µA max at 230 VAC/50 Hz
Input Protection
⢠Internal 3 A fuse in live and neutral lines
No Load Input Power ⢠<0.5 W
Output
Output Voltage
⢠See table
Initial Set Accuracy ⢠±2%
Minimum Load
⢠No minimum load required
Start Up Delay
⢠2 s max at 115 VAC
Start Up Rise Time
⢠<80 ms at 115 VAC
Hold Up Time
⢠15 ms at 110 VAC
Line Regulation
⢠±0.5%
Load Regulation
⢠±5%
Transient Response
⢠4% deviation recovering to <1% within
300 µs for 25% step change
Ripple & Noise
⢠2% pk-pk max, see note 1
Overvoltage Protection ⢠112-140% of nominal output voltage,
auto recovery
Overtemperature
Protection
⢠Unit shuts down, auto recovery
Overload Protection ⢠130-180% auto recovery
Short Circuit Protection ⢠Trip & restart (hiccup mode)
Temperature
Coefficient
⢠±0.04%/°C
General
Efficiency
Isolation
Switching Frequency
Power Density
MTBF
⢠85% minimum (see note 4)
⢠4000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground
⢠50-110 kHz
⢠2.9 W/Inch3
⢠150 kHrs per MIL-HDBK-217F
Environmental
Operating Temperature ⢠0 ºC to +60 ºC, derate linearly from
100% load at +40 °C to 50% at +60 °C
Cooling
⢠Natural convection
Operating Humidity ⢠5-95% RH, non-condensing
Storage Temperature ⢠-40 ºC to +85 ºC
Operating Altitude
⢠3000 m
Shock
⢠30 g, 10 ms on 3 axes
Vibration
⢠5-100 Hz, 2.31 m/s2, 20 mins on 3 axes
EMC & Safety
Emissions
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Field
Dips & Interruptions
Safety Approvals
⢠EN55011, Class B conducted
EN55011, Class B radiated
⢠EN61000-3-2, Class A
⢠EN61000-3-3
⢠EN61000-4-2, ±8 kV air & ±6 kV indirect
Discharge, Perf Criteria A
⢠EN61000-4-3, level 2 Perf Criteria A
⢠EN61000-4-4, level 3 Perf Criteria A
⢠EN61000-4-5, level 3 Perf Criteria A
⢠EN61000-4-6, 3 V rms Perf Criteria A
⢠EN61000-4-8, 1 A/m Perf Criteria A
⢠EN61000-4-11, >95% UT for 10 ms,
60% UT for 100 ms, 30% UT for 500 ms
Perf Criteria A, B, B
⢠EN60601-1, UL60601-1, CSA22.2
No. 601-1 per cUL
|
▷ |