XC1701 Datasheet, PDF (6/10 Pages) Xilinx, Inc – On-chip address counter, incremented by each rising

XC1701L (3.3V), XC1701 (5.0V) and XC17512L (3.3V) Serial Configuration PROMs
XC1701
Absolute Maximum Ratings
Symbol
Description
Units
V_CC
Supply voltage relative to GND
-0.5 to +7.0
V
V_PP
Supply voltage relative to GND
-0.5 to +12.5
V
V_IN
Input voltage relative to GND
-0.5 to V_CC +0.5
V
V_TS
T_STG
T_SOL
Voltage applied to 3-state output
Storage temperature (ambient)
Maximum soldering temperature (10 s @ 1/16 in.)
-0.5 to V_CC +0.5
V
-65 to +150
°C
+260
°C
Note:
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are
stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under
Operating Conditions is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may
affect device reliability.
Operating Conditions
Symbol
V_CC
Description
Commercial
Industrial
Military
Supply voltage relative to GND 0°C to +70°C junction
Supply voltage relative to GND -40°C to +85°C junction
Supply voltage relative to GND -55°C to +125°C case
Min
Max Units
4.75
5.25
V
4.50 5.50
V
4.50 5.50
V
DC Characteristics Over Operating Condition
Symbol
Description
V_IH
High-level input voltage
V_IL
Low-level input voltage
V_OH
High-level output voltage (I_OH = -4 mA)
V_OL
Low-level output voltage (I_OL = +4 mA)
V_OH
High-level output voltage (I_OH = -4 mA)
V_OL
Low-level output voltage (I_OL = +4 mA)
I_CCA
Supply current, active mode
I_CCS
Supply current, standby mode
I_L
Input or output leakage current
Note: During normal read operation V_PP must be connected to V_CC
Commercial
Industrial
Min
2.0
0
3.86
3.76
-10.0
Max
V_CC
0.8
0.32
0.37
10.0
50.0
10.0
Units
V
V
V
V
V
V
mA
µA
µA
5-6
December 10, 1997 (Version 1.1)