English
Language : 

XA2C64A-8VQG44Q Datasheet, PDF (3/16 Pages) Xilinx, Inc – Guaranteed to meet full electrical specifications over
◁
R
XA2C64A CoolRunner-II Automotive CPLD
Absolute Maximum Ratings
Symbol
Description
Value
Units
VCC
Supply voltage relative to ground
–0.5 to 2.0
V
VCCIO
VJTAG(2)
Supply voltage for output drivers
JTAG input voltage limits
–0.5 to 4.0
V
–0.5 to 4.0
V
VCCAUX
VIN(1)
VTS(1)
VSTG(3)
JTAG input supply voltage
Input voltage relative to ground(1)
Voltage applied to 3-state output(1)
Storage Temperature (ambient)
–0.5 to 4.0
V
–0.5 to 4.0
V
–0.5 to 4.0
V
–65 to +150
°C
TJ
Junction Temperature
+125
°C
Notes:
1. Maximum DC undershoot below GND must be limited to either 0.5V or 10 mA, whichever is easiest to achieve. During transitions,
the device pins may undershoot to –2.0v or overshoot to +4.5V, provided this over or undershoot lasts less than 10 ns and with the
forcing current being limited to 200 mA.
2. Valid over commercial temperature range.
3. For soldering guidelines and thermal considerations, see the Device Packaging information on the Xilinx website. For Pb free
packages, see XAPP427.
Recommended Operating Conditions
Symbol
Parameter
Min
VCC
VCCIO
Supply voltage for internal logic Industrial TA = –40°C to +85°C
1.7
and input buffers
Q-Grade TA = -40° C to +105° C 1.7
TJ Maximum = +125° C
Supply voltage for output drivers @ 3.3V operation
3.0
Supply voltage for output drivers @ 2.5V operation
2.3
Supply voltage for output drivers @ 1.8V operation
1.7
Supply voltage for output drivers @ 1.5V operation
1.4
VCCAUX
JTAG programming pins
1.7
DC Electrical Characteristics (Over Recommended Operating Conditions)
Max Units
1.9
V
1.9
V
3.6
V
2.7
V
1.9
V
1.6
V
3.6
V
Symbol
Parameter
Test Conditions
Typical
Max.
ICCSB
ICCSB
ICC(1)
Standby current Industrial
Standby current Q-grade
Dynamic current
VCC = 1.9V, VCCIO = 3.6V
43
VCC = 1.9V, VCCIO = 3.6V
43
f = 1 MHz
-
f = 50 MHz
-
165
700
1.50
7
CJTAG
JTAG input capacitance
f = 1 MHz
-
10
CCLK
Global clock input capacitance
f = 1 MHz
-
12
CIO
I/O capacitance
IIL(2)
Input leakage current
f = 1 MHz
VIN = 0V or VCCIO to 3.9V
-
10
-
+/–10
IIH(2)
I/O High-Z leakage
VIN = 0V or VCCIO to 3.9V
-
+/–10
Notes:
1. 16-bit up/down, Resetable binary counter (one counter per function block) tested at VCC=VCCIO= 1.9V.
Units
μA
μA
mA
mA
pF
pF
pF
μA
μA
DS553 (v1.1) May 5, 2007
www.xilinx.com
3
Product Specification
 ▷