DS107 Datasheet, PDF (2/4 Pages) Xilinx, Inc – Internal 3-state bus capability

— OBSOLETE — OBSOLETE — OBSOLETE — OBSOLETE —
Spartan-XL 3.3V FPGA Automotive IQ Family: Introduction and Ordering
R
DC Specifications
Spartan-XL Absolute Maximum Ratings⁽¹⁾
Symbol
Description
Min
Max
Units
V_CC
Supply voltage relative to GND⁽²⁾
V_IN
Input voltage relative to GND^(2,3)
V_TS
Voltage applied to 3-state output^(2,3)
–0.5
4.0
V
–0.5
V_CC + 0.5
V
–0.5
V_CC + 0.5
V
T_STG
Storage temperature (ambient)
–65
+150
°C
T_J
Junction temperature
-
+135
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions
is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device reliability.
2. With 5V Tolerant I/Os selected, the Maximum DC overshoot must be limited to either +5.5V or 10 mA and undershoot (below GND)
must be limited to either 0.5V or 10 mA, whichever is easier to achieve.
3. With 5V Tolerant I/Os selected, the Maximum AC (during transitions) conditions are as follows; the device pins may undershoot to
–2.0V or overshoot to + 7.0V, provided this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater than
100 mA.
4. Without 5V Tolerant I/Os selected, the Maximum DC overshoot or undershoot must be limited to either 0.5V or 10 mA, whichever is
easier to achieve.
5. Without 5V Tolerant I/Os selected, the Maximum AC conditions are as follows; the device pins may undershoot to –2.0V or overshoot
to V_CC + 2.0V, provided this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater than 100 mA.
6. For soldering guidelines, see the Package Infomation on the Xilinx website.
Spartan-XL Recommended Operating Conditions
Symbol
Description
T_J
Junction temperature
V_CC
Supply voltage relative to GND
V_IH
High-level input voltage⁽¹⁾
V_IL
Low-level input voltage⁽¹⁾
T_IN
Input signal transition time
Notes:
1. Input and output measurement threshold is ~50% of V_CC.
Min
–40
3.0
50% of V_CC
0
-
Max
+125
3.6
5.5
30% of V_CC
250
Units
°C
V
V
V
ns
2
www.xilinx.com
DS107-1 (v2.0) August 9, 2013
Product Specification