X28LC512 Datasheet, PDF (10/19 Pages) Xicor Inc. – 3.3 Volt, Byte Alterable E2PROM

X28LC512/X28LC513
ABSOLUTE MAXIMUM RATINGS*
Temperature under Bias
X28LC512/513 ............................. –10°C to +85°C
X28LC512I/X28LC513I .............. –65°C to +135°C
Storage Temperature ....................... –65°C to +150°C
Voltage on any Pin with
Respect to V_SS ....................................... –1V to +7V
D.C. Output Current ............................................. 5mA
Lead Temperature
(Soldering, 10 seconds) .............................. 300°C
*COMMENT
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and the functional operation of
the device at these or any other conditions above those
indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating condi-
tions for extended periods may affect device reliability.
RECOMMEND OPERATING CONDITIONS
Temperature
Min.
Max.
Commercial
Industrial
0°C
–40°C
+70°C
+85°C
3005 PGM T02
Supply Voltage
X28LC512/513
Limits
3.3V ±10%
3005 PGM T03.1
D.C. OPERATING CHARACTERISTICS (Over recommended operating conditions, unless otherwise specified.)
Limits
Symbol
Parameter
Min.
Max. Units
Test Conditions
I_CC
V_CC Current (Active)
(CMOS Inputs)
25
mA CE = OE = V_IL, WE = V_IH,
All I/O’s = Open, Address Inputs =
0.1xV_CC/0.9xV_CC Levels
@ f = 5MHz
I_SB
V_CC Current (Standby)
(CMOS Inputs)
150
µA OE = V_IL, CE = V_CC – 0.3V
All I/O’s = Open, Other Inputs = V_IH
I_LI
Input Leakage Current
I_LO
Output Leakage Current
10
µA V_IN = V_SS to V_CC
10
µA V_OUT = V_SS to V_CC, CE = V_CC
V_lL(1)
Input LOW Voltage
–1
0.6
V
V_IH(1)
Input HIGH Voltage
2
V_CC + 0.5 V
V_OL
Output LOW Voltage
0.4
V I_OL = 1mA
V_OH
Output HIGH Voltage
2.4
V I_OH = –200µA
Notes: (1) V_IL min. and V_IH max. are for reference only and are not tested.
3005 PGM T04.2
10