W536030P Datasheet, PDF (8/14 Pages) Winbond – VOICE & MELODY CONTROLLER

W536030P/060P/090P/120P
5.2 DC Characteristics
(V_DD−V_SS = 3.0V, No load, FM = 4 MHz with Ring mode, Fs = 32.768 KHz, with Xtal mode, T_A = 25° C unless otherwise
specified)
PARAMETER
SYM.
CONDITIONS
MIN TYP MAX UNIT
Op. Voltage
VDD
2.4
5.5
V
Op. Current
IOP1 Dual clock with crystal
-
400 500 µA
(No Load, no Voice, no
Dual clock with Ring type
400 500
Melody)
Sub-clock only
15
30
Hold Mode Current
IOP2 Sub-clock active only
4
6
µA
Stop Mode Current
IOP3
1
µA
CLK/ADDR Output High
Current
IoH1 Vout = 2.7V
-0.8 mA
CLK/ADDR Output low
Current
IoL1 Vout = 0.4V
0.8 mA
Input Low Voltage
Input High Voltage
Port RA, RB, RE, RF and RH
Output Low Voltage
VIL
VIH
VABL
-
-
I_OL = 2.0 mA
V_SS
-
0.7
-
-
-
0.3
V_DD
1
V_DD
0.4
V
Port RA, RB, RE, RF and RH
Output High Voltage
VABH
I_OH = -2.0 mA
2.4
-
-
V
Pull-up Resistor
RCD Port RC, RD, RG
200 300 400 KΩ
RES Pull-up Resistor
RRES -
50 100 200 KΩ
PWM1/2 Source Current (4) ISPH Volume Option = 00
-20
mA
(R_LOAD = 8Ω between PWM1
And PWM2)
Volume Option = 01
Volume Option = 10
-70
-110
Volume Option = 11
-135
PWM1/2 Sink Current (4)
ISPL Volume Option = 00
20
mA
(R_LOAD = 8Ω between PWM1
Volume Option = 01
70
And PWM2)
Volume Option = 10
110
Volume Option = 11
135
DAC output Current
IDAC V_DD = 3V, RL = 100ohm
-4
-5
Notes:
(4). PWM current deviation will be ±20%.
-6 mA
-8-