W25Q64FVZPIG Datasheet, PDF (77/88 Pages) Winbond – 3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q64FV
8.6 AC Electrical Characteristics
DESCRIPTION
Clock frequency for SPI Read data instructions (03h)
2.7-3.0V / 3.0-3.6V
Clock frequency for QPI Read instructions
(0Bh, EBh) with 2/4/6/8 dummy clocks
Clock frequency for QPI Read instructions
(0Ch) with 2/4/6/8 dummy clocks
Clock frequency for all other SPI/QPI instructions
2.7-3.0V / 3.0-3.6V
Clock High, Low Time
for all instructions except for Read Data (03h)
Clock High, Low Time
for Read Data (03h) instruction
Clock Rise Time peak to peak
Clock Fall Time peak to peak
/CS Active Setup Time relative to CLK
/CS Not Active Hold Time relative to CLK
Data In Setup Time
Data In Hold Time
/CS Active Hold Time relative to CLK
/CS Not Active Setup Time relative to CLK
/CS Deselect Time (for Array Read Æ Array Read)
/CS Deselect Time (for Erase or Program Æ Read
Status Registers)
Volatile Status Register Write Time
Output Disable Time
Clock Low to Output Valid
2.7V-3.0V / 3.0V-3.6V
Clock Low to Output Valid (Non-array Read)
2.7V-3.0V / 3.0V-3.6V
Output Hold Time
/HOLD Active Setup Time relative to CLK
SYMBOL
fR
SPEC
ALT
MIN TYP
MAX
D.C.
33/50
UNIT
MHz
FR
f_C1 D.C.
40/60/80/104 MHz
FR
f_C1 D.C.
50/80/104/104 MHz
FR
f_C1 D.C.
tCLH, tCLL⁽¹⁾
4
tCRLH,
tCRLL⁽¹⁾
tCLCH⁽²⁾
tCHCL⁽²⁾
tSLCH
tCHSL
tDVCH
tCHDX
tCHSH
tSHCH
tSHSL1
tSHSL2
8
0.1
0.1
tCSS 5
5
tDSU 2
tDH 3
5
5
tCSH 10
tCSH 50
tSHQZ⁽²⁾
50
tDIS
tCLQV1
tV1
80/104 MHz
ns
ns
V/ns
V/ns
ns
ns
ns
ns
ns
ns
ns
ns
7
ns
7/6
ns
tCLQV2
tCLQX
tHLCH
tV2
tHO 0
5
8.5 / 7.5 ns
ns
ns
Continued – next page
- 77 -
Publication Release Date: December 19, 2011
Revision D