W25Q64DW_12 Datasheet, PDF (72/82 Pages) Winbond – 1.8V 64M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q64DW
11.6 AC Electrical Characteristics
DESCRIPTION
SYMBOL
SPEC
ALT
MIN TYP
MAX
UNIT
Clock frequency for SPI Read data instructions
(03h)
fR
D.C.
50
MHz
Clock frequency for SPI Quad Read instructions
(6Bh,EBh,E7h,E3h)
FR
f_C1 D.C.
80
MHz
Clock frequency for QPI Read instructions(0Bh,
EBh,0Ch) with 2/4/6/8 dummy clocks
FR
f_C1 D.C.
30/50/80/104 MHz
Clock frequency for QPI Read instructions(0Bh,
EBh,0Ch) with 2/4/6/8 dummy clocks, A<1:0>=0,0
FR
f_C1 D.C.
30/80/104/104 MHz
Clock frequency for all other SPI/QPI instructions
Clock High, Low Time
for all instructions except for Read Data (03h)
FR
tCLH, tCLL⁽¹⁾
f_C1 D.C.
4
104
MHz
ns
Clock High, Low Time
for Read Data (03h) instruction
Clock Rise Time peak to peak
Clock Fall Time peak to peak
tCRLH,
tCRLL⁽¹⁾
8
tCLCH⁽²⁾
0.1
tCHCL⁽²⁾
0.1
ns
V/ns
V/ns
/CS Active Setup Time relative to CLK
tSLCH
tCSS 5
ns
/CS Not Active Hold Time relative to CLK
tCHSL
5
ns
Data In Setup Time
tDVCH
tDSU 2
ns
Data In Hold Time
tCHDX
tDH 3
ns
/CS Active Hold Time relative to CLK
tCHSH
5
ns
/CS Not Active Setup Time relative to CLK
/CS Deselect Time (for Array Read Æ Array Read)
/CS Deselect Time (for Erase or Program Æ Read
Status Registers)
Volatile Status Register Write Time
Output Disable Time
tSHCH
tSHSL1
tSHSL2
tSHQZ⁽²⁾
5
tCSH 10
tCSH 50
50
tDIS
ns
ns
ns
7
ns
Clock Low to Output Valid
tCLQV1
tV1
7
ns
Clock Low to Output Valid (for Read ID instructions)
tCLQV2
tV2
7.5
ns
Output Hold Time
tCLQX
tHO 0
ns
/HOLD Active Setup Time relative to CLK
tHLCH
5
ns
Continued – next page
- 72 -