English
Language : 

W541E261 Datasheet, PDF (7/13 Pages) Winbond – 4BIT MICROCONTROLLER, 2K ×16 ROM, 128 ×4 RAM 128 -DOT LCD
W541E/C261 DATA SHEET
3.3 PAD DESCRIPTION
SYMBOL
XIN1
XOUT1
XIN2
XOUT2
RA0 −RA3
RB0 −RB3
RC0 −RC3
RD0 −RD3
RE0 −RE3
/INT
MFP
I/O
FUNCTION
Input pin for oscillator.
I Connected to crystal or resistor to generate system clock by code option. External
15~20pF capacitor uses to get accurate freq in crystal mode.
Output pin for oscillator
O Connected to crystal or resistor to generate system clock by code option. 20PF
capacitor is built in internal for crystal mode.
I
Input pin for sub-oscillator. Connected to a 32.768 KHz crystal. External 15~20pF
capacitor uses to get accurate freq in crystal mode..
O
oscillator. Connected Output pin for sub to a 32.768 KHz crystal. 20PF capacitor is
built in internal for crystal mode.
I/O
Input/Output port.
Input/output mode specified by port mode 1 register (PM1).
I/O
Input/Output port.
Input/output mode specified by port mode 2 register (PM2).
I
4-bit port for input only.
Each pin has an independent interrupt capability.
I 4-bit port for input only.
O
Output port only.
This port provides high sink current to drive LEDs.
I
External interrupt pin with pull-high resistor. This pin is bonding option for
the W541C250 body. Only for W541E261.
Output pin only.
O This pin can output modulating or nonmodulating frequency, or Timer 1 clock
output specified by mode register 1 (MR1).
RES
SEG0−SEG31
I System reset pin with pull-high resistor.
O
LCD segment output pins.
Can also be used as DC output ports specified by code option.
LCD common signal output pins.
COM0−COM3
DH1, DH2
VDD1, VDD2,
VDD3
VDD
Static 1/2 Duty 1/3 Duty 1/4 Duty
COM0 Used
Used
Used
Used
O
COM1 Not Used Used
Used
Used
COM2 Not Used Not Used Used
Used
COM3 Not Used Not Used Not Used Used
The LCD alternating frequency can be selected by code option.
I Connection terminals for voltage doubler (halver) capacitor.
Positive (+) supply voltage terminal.
I
Refer to Functional Description.
I Positive power supply (+).
Publication Release Date: June 12, 2007
-7-
Revision A1