|
W541E261 Datasheet, PDF (3/13 Pages) Winbond – 4BIT MICROCONTROLLER, 2K ×16 ROM, 128 ×4 RAM 128 -DOT LCD | |||
|
◁ |
W541E/C261 DATA SHEET
2. FEATURES
⢠Operating voltage: 2.4V to 5.5V (LCD drive voltage: 3.0V, or 4.5V)
⢠Operating frequency up to 4 MHz
⢠Crystal/RC oscillation circuit selectable by code option for system clock
⢠Memory
â 2048 Ã 16 bit program ROM (including 2K Ã 4 bit look-up table)
â 128 Ã 4 bit data RAM (including 16 working registers)
â 32 Ã 4 LCD data RAM
⢠Single or Dual Clock Mode
â Single (main oscillator only) or dual clock (both main and sub-oscilator) by mask option .
â Dual-clock slow operation mode: system is operated by the sub-oscillator
(FOSC = Fs and Fm is stopped)
â Sub-oscillator is only 32.768 KHz crystal for dual clock mode.
â Main oscillator is crystal or RC oscillation by mask code option .
â Main clock : High-frequency clock (400 KHz to 4 MHz) or low-frequency clock (32.768 KHz) is
selected by mask code option.
⢠21 input/output pins
â Ports for input only: 2 ports/8 pins
â Input/output ports: 2 ports/8 pins
â Port for output only: 1 port /4 pins (high sink current to drive LEDs)
â MFP output pin: 1 pin (MFP)
⢠Power-down mode
â Hold function: no operation (except for oscillator)
â Stop function: no operation
⢠Five types of interrupts
â Four internal interrupts (Divider 0, Divider 1, Timer 0, Timer 1)
â One external interrupt (Port RC)
⢠LCD driver output
â 32 segment à 4 common
â Static, 1/2 duty (1/2 bias), 1/3 duty (1/2 or 1/3 bias), 1/4 duty (1/3 bias) driving mode can be
selected
â LCD driver output pins can be used as DC output ports; selectable by code option
⢠MFP output pin
â Output is software selectable as modulating or nonmodulating frequency
â Works as frequency output specified by Timer 1
⢠Two built-in 14-bit clock frequency divider circuit (divider 0 and divider 1)
Publication Release Date: June 12, 2007
-3-
Revision A1
|
▷ |