W29GL032C Datasheet, PDF (66/66 Pages) Winbond – 32M-BIT 3.0-VOLT PARALLEL FLASH MEMORY WITH PAGE MODE

W29GL032C
11 HISTORY
VERSION
DATE
PAGE
DESCRIPTION
A
B
C
D
E
Table 11-1
09-21-2010
01-19-2011
02-16-2011
05-31-2011
10-18-2011
Revision History
-
5
32
32&52
32&42
32
32
49
57
57
12
54
32 & 53
2
20
32
32 & 33
33 & 53
Preliminary
Change Device ID H/L to 0
Updated tWC
Updated tVCS
Update tGHEL Description & Waveform.
Deleted Effective Write Buffer Program (Byte)
Updated Program Operation (Word/Byte) tWHWH1
Updated tFHQV parameter value.
Updated Part Number Ordering Definitions
Added TFBGA48 Drawing
VHH vs. ACC PGM warning
Correct TSOP missing E parameter
Correct Parameter Category tRC & Cycling
Corrected miss labeled ball on TFBGA48 diagram
Section 7.4.2 1^st Paragraph removed ‘erase’
Section 7.4.2 3^rd Paragraph Add OTP statement.
tCWC added definition to Table 8.5
tWHWH1 & tWHWH2 moved parameter to Typ.
Sector Erase time 1 to 2Sec Max
Preliminary Designation
The “Preliminary” designation on a Winbond datasheet indicates that the product is not full
characterized. The specifications are subject to change and are not guaranteed. Winbond or an
authorized sales representative should be consulted for current information before using this product.
Trademarks
Winbond is a trademark of Winbond Electronics Corporation. All other marks are the property of their
respective owner.
Important Notice
Winbond products are not designed, intended, authorized or warranted for use as components in
systems or equipment intended for surgical implantation, atomic energy control instruments, airplane
or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, or for other applications intended to support or sustain life. Furthermore, Winbond
products are not intended for applications wherein failure of Winbond products could result or lead to a
situation where in personal injury, death or severe property or environmental damage could occur.
Winbond customers using or selling these products for use in such applications do so at their own risk
and agree to fully indemnify Winbond for any damages resulting from such improper use or sales.
Information in this document is provided solely in connection with Winbond products. Winbond
reserves the right to make changes, corrections, modifications or improvements to this document and
the products and services described herein at any time, without notice.
60