W971GG6JB_13 Datasheet, PDF (5/87 Pages) Winbond – 8M X 8 BANKS X 16 BIT DDR2 SDRAM

W971GG6JB
3. ORDER INFORMATION
PART NUMBER
W971GG6JB-18
W971GG6JB-25
W971GG6JB25I
W971GG6JB25A
W971GG6JB25K
W971GG6JB25L
W971GG6JB-3
W971GG6JB-3A
SPEED GRADE
DDR2-1066 (6-6-6)
DDR2-800 (5-5-5)
DDR2-800 (5-5-5)
DDR2-800 (5-5-5)
DDR2-800 (5-5-5)
DDR2-800 (5-5-5)
DDR2-667 (5-5-5)
DDR2-667 (5-5-5)
OPERATING TEMPERATURE
0°C ≤ TCASE ≤ 85°C
0°C ≤ TCASE ≤ 85°C
-40°C ≤ TCASE ≤ 95°C
-40°C ≤ TA, TCASE ≤ 95°C
-40°C ≤ TA, TCASE ≤ 105°C
0°C ≤ TCASE ≤ 85°C
0°C ≤ TCASE ≤ 85°C
-40°C ≤ TA, TCASE ≤ 95°C
4. KEY PARAMETERS
SYM.
SPEED GRADE
Bin(CL-tRCD-tRP)
Part Number Extension
@CL = 7
tCK(avg) Average clock period
@CL = 6
@CL = 5
@CL = 4
@CL = 3
tRCD
tREFI
tRP
tRC
tRAS
IDD0
IDD1
IDD2P
IDD4R
IDD4W
IDD5B
IDD6
IDD7
Active to Read/Write Command Delay Time
-40°C ≤ TCASE ≤ 85°C
Average periodic
refresh Interval
0°C ≤ TCASE ≤ 85°C
85°C < TCASE ≤ 95°C
95°C < TCASE ≤ 105°C
Precharge to Active Command Period
Active to Ref/Active Command Period
Active to Precharge Command Period
Operating one bank active-precharge current
Operating one bank active-read-precharge current
Precharge power-down current
Operating burst read current
Operating burst write current
Burst refresh current
Self refresh current (TCASE ≤ 85C)
Operating bank interleave read current
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Min.
Min.
Max.
Max.
Max.
Max.
Max.
Max.
Max.
Max.
DDR2-1066 DDR2-800 DDR2-800 DDR2-667
6-6-6
5-5-5
5-5-5
5-5-5
-18
-25/25I/25A/25K 25L
-3/-3A
1.875 nS



7.5 nS



1.875 nS
2.5 nS 2.5 nS

7.5 nS
8 nS
8 nS

2.5 nS
2.5 nS 2.5 nS
3 nS
7.5 nS
8 nS
8 nS
8 nS
3 nS
3.75 nS 3.75 nS 3.75 nS
7.5 nS
8 nS
8 nS
8 nS

5 nS
5 nS
5 nS

8 nS
8 nS
8 nS
11.25 nS
*²
7.8 μS*¹
3.9 μS*⁴
*⁶
12.5 nS
7.8 μS*^{2, 3}
7.8 μS*¹
3.9 μS*⁴
3.9 μS*⁵
12.5 nS
*²
7.8 μS*¹
3.9 μS*⁴
*⁶
15 nS
7.8 μS*^{2, 3}
7.8 μS*¹
3.9 μS*⁴
*⁶
11.25 nS
12.5 nS 12.5 nS
15 nS
51.25 nS
52.5 nS 52.5 nS
55 nS
40 nS
40 nS
40 nS
40 nS
85 mA
80 mA 80 mA 75 mA
90 mA
85 mA 85 mA 80 mA
10 mA
10 mA
7 mA 10 mA
155 mA
130 mA 130 mA 120 mA
160 mA
135 mA 135 mA 125 mA
145 mA
130 mA 130 mA 120 mA
10 mA
10 mA
4 mA 10 mA
285 mA
225 mA 225 mA 195 mA
Notes:
1. All speed grades support 0°C ≤ TCASE ≤ 85°C with full JEDEC AC and DC specifications.
2. For -18, -25, 25L and -3 speed grades, -40°C ≤ TCASE < 0°C is not available.
3. 25I, 25A, 25K and -3A speed grades support -40°C ≤ TCASE ≤ 85°C with full JEDEC AC and DC specifications.
4. For all speed grade parts, TCASE is able to extend to 95°C with doubling Auto Refresh commands in frequency to a 32 mS
period ( tREFI = 3.9 µS) and to enter to Self Refresh mode at this high temperature range via A7 "1" on EMR (2).
5. For 25K automotive speed grade, TCASE is able to extend to 105°C with doubling Auto Refresh commands in frequency to a
32 mS period ( tREFI = 3.9 µS) and to enter to Self Refresh mode at this high temperature range via A7 "1" on EMR (2).
6. For -18, -25, 25L, 25I, 25A, -3 and -3A speed grades, 95°C < TCASE ≤ 105°C is not available.
Publication Release Date: Sep. 24, 2013
-5-
Revision A09