W78LE58_06 Datasheet, PDF (32/34 Pages) Winbond – 8-BIT MICROCONTROLLER

W78LE58/W78L058A
INC SFRAL
; NEXT ADDRESS
MOV A,SFRAL
JNZ BLANK_CHECK_LOOP
INC SFRAH
MOV A,SFRAH
CJNE A,#80H,BLANK_CHECK_LOOP ; END ADDRESS = 7FFFH
JMP PROGRAM_32KROM
BLANK_CHECK_ERROR:
MOV P1,#F0H
MOV P3,#F0H
JMP $
;*******************************************************************************
;* RE-PROGRAMMING 32KB APROM BANK
;*******************************************************************************
PROGRAM_32KROM:
MOV DPTR,#0H
MOV R2,#00H
MOV R1,#00H
MOV DPTR,#0H
MOV SFRAH,R1
MOV SFRCN,#21H
MOV R6,#BEH
MOV R7,#FFH
MOV TL0,R6
MOV TH0,R7
; THE ADDRESS OF NEW ROM CODE
; TARGET LOW BYTE ADDRESS
; TARGET HIGH BYTE ADDRESS
; EXTERNAL SRAM BUFFER ADDRESS
; SFRAH, TARGET HIGH ADDRESS
; SFRCN(C7H) = 21 (PROGRAM 32K)
; SET TIMER FOR PROGRAMMING, ABOUT 50 μS.
PROG_D_32K:
MOV SFRAL,R2
; SFRAL(C4H) = LOW BYTE ADDRESS
MOVX A,@DPTR ; READ DATA FROM EXTERNAL SRAM BUFFER. BY ACCORDING USER?
; CIRCUIT, USER MUST MODIFY THIS INSTRUCTION TO FETCH CODE
MOV SFRFD,A
; SFRFD(C6H) = DATA IN
MOV TCON,#10H ; TCON = 10H, TR0 = 1,GO
MOV PCON,#01H ; ENTER IDLE MODE (PRORGAMMING)
INC DPTR
INC R2
CJNE R2,#0H,PROG_D_32K
INC R1
MOV SFRAH,R1
CJNE R1,#80H,PROG_D_32K
;*****************************************************************************
; * VERIFY 32KB APROM BANK
;*****************************************************************************
MOV R4,#03H
; ERROR COUNTER
MOV R6,#FEH
; SET TIMER FOR READ VERIFY, ABOUT 1.5 μS.
MOV R7,#FFH
MOV TL0,R6
MOV TH0,R7
MOV DPTR,#0H
; The start address of sample code
MOV R2,#0H
; Target low byte address
MOV R1,#0H
; Target high byte address
MOV SFRAH,R1
; SFRAH, Target high address
MOV SFRCN,#00H ; SFRCN = 00 (Read ROM CODE)
- 32 -