W83L785R Datasheet, PDF (25/38 Pages) Winbond – WINBOND H/W MONITORING IC FOR NOTEBOOK

W83L785R/W83L785G
7.11 GPIO1/2, GPIO7/8, and GPIO11/14/15/16 Output Control Register  Index 4Ah
Power on default [7:0] = 0000, 0000 b
BIT
NAME
7 EN_GP16OUT
6 EN_GP15OUT
5 EN_GP14OUT
4 EN_GP11OUT
3 EN_GP8OUT
2 EN_GP7OUT
1 EN_GP2OUT
0 EN_GP1OUT
READ/WRITE
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
DESCRIPTION
Enable GPIO16 (Pin 16) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
Enable GPIO15 (Pin 15) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
Enable GPIO14 (Pin 14) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
Enable GPIO11 (Pin 11) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
Enable GPIO8 (Pin 8) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
Enable GPIO7 (Pin 7) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
Enable GPIO2 (Pin 2) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
Enable GPIO1 (Pin 1) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
7.12 GPIO5, GPIO6, and GPIO13 Control Register  Index 4Bh
Power on default [7:0] = 0000, 0000 b
BIT
NAME
6,7 Reserved
5 EN_GP13OUT
4 GPIO13_VAL
3 EN_GP6OUT
2 GPIO6_VAL
1 EN_GP5OUT
0 GPIO5_VAL
READ/WRITE
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
DESCRIPTION
Reserved
Enable GPIO13 (Pin 13) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
GPIO13 Output Value. GPIO13 output value if
EN_GP13OUT is set to 1. Write 1, then pin 13 (GPIO13)
always generate logic high signal. Write 0, pin 13
(GPIO13) always generates logic low signal. This bit
default 0. Read will return this pin value
Enable GPIO6 (Pin 6) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
GPIO6 Output Value. GPIO6 output value if
EN_GP6OUT is set to 1. Write 1, then pin 6 (GPIO6)
always generate logic high signal. Write 0, pin 6 (GPIO6)
always generates logic low signal. This bit default 0. Read
will return this pin value
Enable GPIO5 (Pin 5) output function if set to 1.
Otherwise, this pin serves as input. (Default is input)
GPIO5 Output Value. GPIO5 output value if
EN_GP5OUT is set to 1. Write 1, then pin 5 (GPIO5)
always generate logic high signal. Write 0, pin 5 (GPIO5)
always generates logic low signal. This bit default 0. Read
will return this pin value
- 21 -
Publication Release Date: Apr. 2006
Revision 1.1