 English |
|
|
|
|
|
|
|
| W681310 Datasheet, PDF (10/36 Pages) Winbond – 3V SINGLE-CHANNEL VOICEBAND CODEC | |||
| |||
| ◁ |
W681310
7.3.1. Analog and Digital Supply
The power supply for the analog and digital parts of the W681310 must be 2.7V to 5.25V. This supply
voltage is connected to the VDD pin. The VDD pin needs to be decoupled to ground through a 0.1 μF
ceramic capacitor.
7.3.2. Analog Ground Reference Bypass
The system has an internal precision voltage reference which generates the VDD/2 mid-supply analog
ground voltage. This voltage needs to be decoupled to VSS at the VREF pin through a 0.1 μF ceramic
capacitor.
7.3.3. Analog Ground Reference Voltage Outpt
The analog ground reference voltage is available for external reference at the VAG pin. This voltage
needs to be decoupled to VSS through a 0.01 μF ceramic capacitor. The analog ground reference
voltage is generated from the voltage on the VREF pin and is also used for the internal signal processing.
7.4. PCM INTERFACE
The PCM interface is controlled by pins BCLKR, FSR, BCLKT & FST. The input data is received
through the PCMR pin and the output data is transmitted through the PCMT pin. The modes of
operation of the interface are shown in Table 7.3.
BCLKR
FSR
Interface Mode
64 kHz to 4.800 MHz 8 kHz
Long or Short Frame Sync
VSS
VSS
ISDN GCI with active channel B1
VSS
VDD
ISDN GCI with active channel B2
VDD
VSS
ISDN IDL with active channel B1
VDD
VDD
ISDN IDL with active channel B2
Table 7.3 PCM Interface mode selections
- 10 -
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese