W78C32C Datasheet, PDF (1/14 Pages) Winbond – 8-BIT MICROCONTROLLER

W78C32C
8-BIT MICROCONTROLLER
GENERAL DESCRIPTION
The W78C32C microcontroller supplies a wider frequency range than most 8-bit microcontrollers on
the market. It is compatible with the industry standard 80C32 microcontroller series.
The W78C32C contains four 8-bit bidirectional parallel ports, three 16-bit timer/counters, and a serial
port. These peripherals are supported by a six-source, two-level interrupt capability. There are 256
bytes of RAM, and the device supports ROMless operation for application programs.
The W78C32C microcontroller has two power reduction modes, idle mode and power-down mode,
both of which are software selectable. The idle mode turns off the processor clock but allows for
continued peripheral operation. The power-down mode stops the crystal oscillator for minimum power
consumption. The external clock can be stopped at any time and in any state without affecting the
1.processor.
FEATURES
• 8-bit CMOS microcontroller
• Fully static design
• Low standby current at full supply voltage
• DC-40 MHz operation
• 256 bytes of on-chip scratchpad RAM
• ROMless operation
• 64K bytes program memory address space
• 64K bytes data memory address space
• Four 8-bit bidirectional ports
• Three 16-bit timer/counters
• One full duplex serial port
• Boolean processor
• Six-source, two-level interrupt capability
• Built-in power management
• Packages:
− DIP 40: W78C32C-24/40
− PLCC 44: W78C32CP-24/40
− QFP 44: W78C32CF-24/40
Publication Release Date: July 1999
-1-
Revision A2