W764M32V-XSBX Datasheet, PDF (5/16 Pages) White Electronic Designs Corporation – 64Mx32 Flash Multi-Chip Package 3.0V Page Mode Flash Memory

White Electronic Designs
W764M32V-XSBX
ADVANCED*
Parameter
Input Load Current (1)
DC CHARACTERISTICS – CMOS COMPATIBLE
VCC = 3.3V ± 0.3V, -55°C ≤ TA ≤ +125°C
Symbol Conditions
Min
Typ
ILI
VIN = VSS to VCC, #VCC = VCC(MAX)
A9 Input Load Current
ILIT
VCC = to VCC(MAX); A9 = 12.5V
Output Leakage Current
ILO
VOUT = VSS to VCC, # VCC =
VCC(MAX)
VCC Active Current for Read (1)
CE# = VIL#, OE# = VIH, VCC =
ICC1
VCC(MAX); # f = 1 MHz, Byte Mode
CE# = VIL#, OE# = VIH, VCC =
VCC(MAX); # f = 5MHz, Word Mode
24
120
VCC Intra-Page Read Current (1)
ICC2
CE# = VIL#, OE# = VIH, VCC =
VCC(MAX); f = 10MHz
1
VCC Active Erase/Program Current (2,3)
ICC3
CE# = VIL#, OE# = VIH, VCC =
VCC(MAX)
200
VCC = VCC(MAX); VIO = VCC; OE# =
VCC Standby Current
ICC4 VIH; # VIL = VSS + 0.3V/-0.1V; #
4
CE#, RESET# = VSS ± 0.3V
VCC Reset Current
ICC5
VCC = VCC(MAX); VIO = VSS + 0.3V/-
0.1V; RESET# = VSS ± 0.3V
4
VCC = VCC(MAX); VIO = VCC; VIH =
Automatic Sleep Mode (4)
ICC6 VCC ± 0.3V; #VIL = VSS + 0.3V/-
4
0.1V; WP#/ACC = VIH
ACC Accelerated Program Current
IACC
CE# = VIL, OE# = VIH, VCC =
VCC(MAX), #WP#/ACC = VIH
WP#/ACC pin
40
VCC pin
200
Input Low Voltage (5)
Input High Voltage (5)
Voltage for ACC Erase/Program
Acceleration
Voltage for Autoselect and Temporary
Sector Unprotect
Output Low Voltage (5)
Output High Voltage (5)
Low VCC Lock-Out Voltage
VIL
VIH
VHH VCC = 2.7 - 3.6V
VID VCC = 2.7 - 3.6V
VOL IOL = -100 µA
VOH IOH = -100 µA
VLKO
-0.1
0.7 x VIO
11.5
11.5
0.85 x VIO
2.3
NOTES:
1. The ICC current is typically less than 2 mA/MHz, with OE# at VIH
2. ICC active while Embedded Erase or Embedded Program or Write Buffer Programming is in progress.
3. Not 100% tested.
4. Automatic sleep mode enables the lower power mode when addresses remain stable for tACC + 30ns.
5. VIO = 1.65-1.95V or 2.7-3.6V.
6. VCC = 3 V and VIO = 3V or 1.8V. When VIO is at 1.8V, I/O pins cannot operate at 3V.
Max
Unit
WP/ACC: ±2.0
Others: ±1.0
µA
35
µA
±1.0
µA
80
mA
200
mA
10
mA
320
mA
20
µA
20
µA
20
µA
80
mA
320
0.3 x VIO
V
VIO + 0.3
V
12.5
V
12.5
V
0.15 x VIO
V
V
2.5
V
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
March 2006
Rev. 2
5
White Electronic Designs Corporation • [phone] • www.wedc.com