LV200 Datasheet, PDF (4/12 Pages) Wall Industries,Inc. – 200 Watt Half-Brick DC - DC Power Converters

Wall Industries, Inc.
Advanced Publication
LV200 SERIES
200 Watt Half-Brick DC/DC Power Converters
MECHANICAL DRAWING
CHASSIS MOUNT MODELS (PREFIX “CM”)
M3 X 0.5 FULL THD THRU 4X
CAUTION: MOUNTING HARDWARE PROTRUDSION INTO UNIT MUST
NOT EXCEED A MAXIMUM DEPTH OF .25 [6.4] FROM SURFACE-A
MAX RECEIVING TORQUE 4-LBS/IN [0.45-N.m]
UNLESS OTHERWISE SPECIFIED
ALL DIMENSONS ARE IN INCHES
[ XX ] ARE IN MILLIMETERS
APPLIED TOLERANCES:
ANGLES= ±1°
.XX=±.02[0.5] .XXX=±.010[0.25]
DO NOT SCALE DRAWING
INTERPRET DIMENSION AND TOLERANCE
PER ASME Y14.5M - 1994
THIRD ANGLE PROJECTION
NOTES
1. PIN TO PIN TOLERANCE ± 0.01 [±0.3],
PIN DIAMETER TOLERANCE: ±0.005 [±0.13].
2. CASE MATERIAL OF THE CONVERTER: Ø.040 [1.02] THICK, ALUMINUM ALLOY 3003-0, PER: QQA 250/2.
3. UNLESS OTHERWISE SPECIFIED.
4. UNIT COMES WITH EITHER .112 (NO.4)-4OUNC-2B THREADED THRU INSERTS OR FOR Ø.125 THRU-HOLE FOR THE CHASSIS MOUNT BOARD
ADD: “TH” SUFFIX TO MODEL PART NUMBER. EXAMPLE: CMLV12S15-200TH
07/11/2013
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 4 of 12