LV200 Datasheet, PDF (3/12 Pages) Wall Industries,Inc. – 200 Watt Half-Brick DC - DC Power Converters

Wall Industries, Inc.
Advanced Publication
LV200 SERIES
200 Watt Half-Brick DC/DC Power Converters
SPECIFICATIONS: LV200 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
PHYSICAL SPECIFICATIONS
Weight
Standard models
Chassis Mount Models
4.0oz (113g)
7.52oz (213g)
Dimensions (L x W x H)
Standard models
Chassis Mount Models
2.40 x 2.28 x 0.50 inches (61.0 x 57.9 x 12.7 mm)
5.70 x 3.40 x 1.10 inches (144.8 x 86.4 x 28.0 mm)
Case Material
Thick, aluminum alloy
Base Material
TBD
Potting Material
TBD
Shielding
Six-sided
SAFETY & EMC CHARACTERISTICS
Safety Approvals
IEC60950-1, UL60950-1, EN60950-1, EN50155
EMI
EN55011, EN55022
Class A
ESD
EN61000-4-2
Air ±8kV and Contact ±6kV
Perf. Criteria A
Radiated Immunity
EN61000-4-3
20 V/m
Perf. Criteria A
Fast Transient
EN61000-4-4
±2kV
Perf. Criteria A
Surge
EN61000-4-5
EN55024 ±2kV and EN50155 ±2kV
Perf. Criteria A
Conducted Immunity
EN61000-4-6
10 Vrms
Perf. Criteria A
MECHANICAL DRAWING
STANDARD MODELS
LABEL
DATE CODE
SEE NOTE-4
KEY PIN/ NO CONNECTION
WALL ^R INDUSTRIES
DC/DC CONVERTER
XXXX
MODEL NAME
EXETER, NH 03833
XXXX
2.28+-..0023 57.9+-00..85
SERIAL NO:
.50 [12.7]
TO STANDOFFS ONLY
6
1
1.400 [35.56]
PIN DESIGNATION
1 -OUTPUT
2 -SENSE
3 TRIM
4 +SENSE
5 +OUT
6 -Vin
7 CASE GRD
8 KEY PIN/NC
9 ON/OFF
10 +Vin
PIN Ø
Ø.081
Ø.040
Ø.040
Ø.040
Ø.081
Ø.081
Ø.040
Ø.081
Ø.040
Ø.081
7
2
1.000 [25.40]
.50 [12.7]
.30 [7.6]
LEXAN INSULATOR 2X
8
3
.700 [17.78]
9
4
.400 [10.16]
10
5
.000 [0.00]
1.900 [48.26]
.19+-..0023 4.8+-00..65
.20 MIN [5.1 MIN]
SEE NOTE-3
PIN LENGTH FROM
STANDOFFS ONLY
UNLESS OTHERWISE SPECIFIED
ALL DIMENSONS ARE IN INCHES
[ XX ] ARE IN MILLIMETERS
APPLIED TOLERANCES:
ANGLES= ±1°
.XX=±.02[0.5] .XXX=±.010[0.25]
DO NOT SCALE DRAWING
INTERPRET DIMENSION AND TOLERANCE
PER ASME Y14.5M - 1994
THIRD ANGLE PROJECTION
NOTES:
1. PIN-TO-PIN TOLERANCE ±.01 [±0.3]
PIN DIAMETER TOLERANCE: ±.005 [±0.13]
2. CASE MATERIAL: 0.040 [1.02] THICK, ALUMINUM ALLOY 3003-0, PER: QQA 250/2
3. UNLESS OTHERWISE SPECIFIED
4. UNIT COMES WITH EITHER 3M x 0.5 THREADED THRU INSERTS OR FOR Ø.125 THRU-HOLE ADD “TH” SUFFIX TO THE MODEL NUMBER.
5. CONSULT FACTORY FOR OPTIONAL HEATSINK
07/11/2013
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 3 of 12