PSQP100 Datasheet, PDF (3/4 Pages) Wall Industries,Inc. – 100 Watt Quad Output Built-In Active PFC Function AC/DC Switching Power Supply

PSQP100 Series
100 Watt Quad Output
Built-In Active PFC Function
AC/DC Switching Power Supply
NOTES
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient
temperature.
2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF &
47uF parallel capacitor.
3. Tolerances include set up tolerance, line regulation, and load regulation.
4. Line Regulation is measured from low line to high line at rated load.
5. The power supply is considered a component, which will be installed into final equipment. The final equipment
must be re-confirmed that it still meets EMC directives
6. Derating may be needed under low input voltages. Please check the derating curve for more details.
BLOCK DIAGRAM
fosc: 100KHz
DERATING CURVE
OUTPUT DERATING VS INPUT VOLTAGE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]