PSQP100 Datasheet, PDF (1/4 Pages) Wall Industries,Inc. – 100 Watt Quad Output Built-In Active PFC Function AC/DC Switching Power Supply

PSQP100 Series
100 Watt Quad Output
Built-In Active PFC Function
AC/DC Switching Power Supply
FEATURES
● 3 Year Warranty
● Low Cost, High Reliability
● CH.4: Polarity is Selectable
● Cooling by Free Air Convection
● Universal AC Input / Full Range
● Fixed Switching Frequency at 100KHz
● Built-In Active PFC Function, PF > 0.95
● Soft-Start Circuit, Limiting AC Surge Current
● Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS: PSQP100 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range (See Note 6)
90 ~ 264VAC (127 ~ 370VDC)
Input Frequency
47 to 63Hz
AC Current (typical)
1.5A @ 115VAC 0.75A @ 230VAC
Inrush Current (typical)
Cold Start ≤ 40A @ 230VAC
Leakage Current
< 3.5mA @ 240VAC
Power Factor (typical)
PF > 0.95 @ 230VAC PF > 0.98 @ 115VAC and full load
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power
See Table
PSQP1003A: CH.1: ±3.0% CH.2: ±3.0% CH.3: ±6.0% CH.4: ±5.0%
PSQP1003B: CH.1: ±3.0% CH.2: +3.0% CH.3: ±6.0% CH.4: ±5.0%
PSQP1003C: CH.1: ±3.0% CH.2: ±3.0% CH.3: +8, -6% CH.4: ±5.0%
Voltage Tolerance (See Note 3)
PSQP1003D: CH.1: ±3.0%
PSQP100B: CH.1: ±3.0%
CH.2: ±3.0%
CH.2: ±6.0%
CH.3: ±6.0% CH.4: ±5.0%
CH.3: +10, -6% CH.4: ±5.0%
PSQP100C: CH.1: ±3.0% CH.2: +6, -10% CH.3: ±8.0% CH.4: ±5.0%
PSQP100D: CH.1: ±3.0% CH.2: ±3.0% CH.3: ±6.0% CH.4: ±5.0%
PSQP100F: CH.1: ±3.0% CH.2: ±3.0% CH.3: ±6.0% CH.4: ±5.0%
Line Regulation (See Note 4)
PSQP100B & PSQP100C: CH.1: ±1.0%
Other Models:
CH.1: ±1.0%
CH.2: ±2.0%
CH.2: ±1.0%
CH.3: ±2.0% CH.4: ±1.0%
CH.3: ±2.0% CH.4: ±1.0%
Load Regulation
PSQP100B: CH.1: ±2.0%
Other Models: CH.1: ±2.0%
CH.2: ±6.0%
CH.2: ±2.0%
CH.3: ±6.0%
CH.3: ±6.0%
CH.4: ±2.0%
CH.4: ±2.0%
PSQP1003A, PSQP1003B, PSQP1003C, & PSQP1003D: CH.1: 4.75 ~ 5.5V, CH.2: 3.14 ~ 3.63V
Voltage Adjustment Range
PSQP100B & PSQP100C: CH.1: 4.75 ~ 5.5V
PSQP100D: CH.1: 4.75 ~ 5.5V, CH.2: 11.4 ~ 13.2V
PSQP100F: CH.1: 4.75 ~ 5.5V, CH.2: 14.3 ~ 16.5V
Output Current
See Table
Ripple & Noise (max) (See Note 2)
See Table
Setup, Rise Time
PSQP100B & PSQP100C: 1000ms, 50ms at full load
Other Models: 800ms, 50ms @ 230VAC 800ms, 50ms @ 115VAC and full load
Hold Up Time (typical)
24ms @ 230VAC 24ms @ 115VAC and full load
Temperature Coefficient
±0.03%/°C (0 ~ 50°C)
PROTECTION
PSQP100B & PSQP100C: 105 ~ 135% rated output power
Overload Protection
Other Models: 105 ~ 150% rated output power
Protection Type: Hiccup mode, recovers automatically after fault condition is removed.
PSQP1003A, PSQP1003B, PSQP1003C, & PSQP1003D CH.1: 5.75 ~ 6.75VDC CH.2: 3.8 ~ 4.4V
PSQP100B & PSQP100C: CH.1 5.75 ~ 6.75V
Over Voltage Protection
PSQP100D: CH.1 5.75 ~ 6.75V CH.2: 13.8 ~ 16.2V
PSQP100F: CH.1 5.75 ~ 6.75V CH.2: 17.25 ~ 20.25V
Protection Type: Shutdown output voltage, re-power on to recover.
Over Temperature (Option)
95°C ±5°C (TSW1)
Protection Type: Shutdown output voltage, recovers automatically after temperature goes down.
GENERAL SPECIFICATIONS
Efficiency (typical)
See Table
Switching Frequency
100KHz
Withstand Voltage
3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG)
Isolation Resistance
100MΩ/500DC (Input to Output, Input to FG, and Output to FG)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]