PSGE50 Datasheet, PDF (3/5 Pages) Wall Industries,Inc. – AC/DC Switching Power Supplies

Rev. D
PSGE50 Series
Single Output
Up to 52.8 Watts
AC/DC Switching Power Supplies
Model Number Input Voltage Range
PSGE-50-3.3
MODEL SELECTION TABLE
Output
Voltage
Output
Current
Load ⁽³⁾
Output ⁽¹⁾
Regulation Ripple & Noise
3.3 VDC
10A
±2.0%
100mVp-p
Output
Power
33W
Efficiency ⁽⁴⁾
78%
PSGE-50-5
5 VDC
10A
±1.0%
100mVp-p
50W
83%
PSGE-50-12
88 ~264 VAC
12 VDC
4.2A
±0.5%
120mVp-p
50.4W
88%
PSGE-50-15
(125~373 VDC)
15 VDC
3.4A
±0.5%
120mVp-p
51W
89%
PSGE-50-24
24 VDC
2.2A
±0.5%
120mVp-p
52.8W
90%
PSGE-50-48
48 VDC
1.1A
±0.5%
200mVp-p
52.8W
90%
NOTES
1. Ripple & noise is measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1µF capacitor and a
47µF capacitor in parallel.
2. Tolerance includes set up tolerance, line regulation, and load regulation.
3. Load regulation is measured from 0% to 100% full load.
4. Typical value at 230VAC input voltage.
5. The length of the setup time is measured at first cold start; turning the power supply ON and OFF very quickly may lead
to an increase in the setup time.
6. The power supply is considered a component which will be installed into final equipment. The final equipment must be
re-confirmed that it still meets EMC directives.
DERATING CURVES
Load vs Temperature
100
80
60
40
20
-25 0 10 20 30 40 50 60 70
Ambient Temperature (°C)
100
90
80
70
60
50
40
90
Load vs Input Voltage
Ta=25°C
100
110
120
264
Input Voltage (VAC)
01/08/2013
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 3 of 5