English
Language : 

PS2K4 Datasheet, PDF (2/4 Pages) Wall Industries,Inc. – With PFC 2400 Watt Single Output AC/DC Switching Power Supply
PS2K4 Series
With PFC
2400 Watt Single Output
AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
Storage Temperature
Working Humidity
Storage Humidity
Vibration
Cooling
MTBF
PHYSICAL SPECIFICATIONS
Weight
Dimensions
Warranty
SAFETY & EMC (See Note 6)
Safety Standards
EMI Conduction & Radiation
Harmonic Current
EMS Immunity
-20°C to +65°C (refer to “Output Power vs Ambient Temperature” derating curve)
-20°C to +85°C
20% to 90% RH (non-condensing)
10% to 95% RH
10 ~ 200Hz, 2g 10 min./1cycle, 60 min. each along X, Y, and Z axes.
By fan: > 20% load or > 50°C
24,900 hours minimum MIL-HDBK-217F (25°C)
9.0kg
320(L) x 212(W) x 124(H) mm
3 years
UL60950, TUVEN60950 Approved
Compliance to EN55022 (CISPR22) class A
Compliance to EN61000-3-2,3
Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A.
OUTPUT VOLTAGE / CURRENT RATING CHART
Model Number Output Voltage Output Current
PS2K4-09
9 VDC
266A
PS2K4-12
12 VDC
200A
PS2K4-15
15 VDC
160A
PS2K4-24
24 VDC
100A
PS2K4-48
48 VDC
50A
Output Power
2400W
2400W
2400W
2400W
2400W
Ripple & Noise
90mVp-p
120mVp-p
150mVp-p
150mVp-p
200mVp-p
Efficiency
83%
84%
85%
88%
89%
NOTES
1. Input voltage is 90 ~ 260VAC however, the unit does not reach full power until >170VAC. See derating curve below.
2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
3. Ripple & noise is measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance: includes set up tolerance, line regulation and load regulation.
5. Current limiting 3 times (1.5s, 3.0s, 5.0s) then intelligent auto recovery before shut down
6. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed
that it still meets EMC directives.
DERATING CURVES
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797