LANEW3 Datasheet, PDF (2/4 Pages) Wall Industries,Inc. – 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range

SPECIFICATIONS (CONTINUED)
OUTPUT SPECIFICATIONS (CONTINUED)
Output Power
Output Current
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
Temperature Coefficient
PROTECTION
Short Circuit Protection
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Isolation Voltage (input to output)
Insulation Resistance
Isolation Capacitance
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Relative Humidity
Thermal Shock
Vibration
MTBF (see Note 1)
PHYSICAL SPECIFICATIONS
Weight
Dimensions
Case Material
Base Material
Potting Material
SAFETY & EMC
Safety Standard Pending
EMC Characteristics (See Note 2)
LANEW3 Series
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
25% load step change
3 Watts max.
See Table
75mVp-p
500µs typ.
±0.1% / °C max.
Continuous, automatic recovery
Full load to minimum load
See Table
100KHz, min.
1600VDC, min.
10GΩ min.
1000pF max.
Bellcore TR-NWT-000332
MIL-STD-217F
-40°C ~ +71°C (without derating)
+71°C ~+100°C (with derating)
-55°C to +125°C
5% to 95% RH
MIL-STD-810D
10-55Hz, 10G, 30 minutes along X, Y, and Z axis
4,386,000 Hours
2,401,000 Hours
4.8 grams (0.17oz)
0.86 x 0.36 x 0.44 inches (21.8 x 9.2 x 11.1 mm)
Non-conductive black plastic
None
Silicon (UL94-V0)
5V nominal input
12V nominal input
24V nominal input
48V nominal input
100µF & 10µF
100µF & 10µF
10µF & 120µF
10µF & 120µF
EMC External Circuit
IEC60950-1, UL60950-1, EN60950-1
Meet EN55022 classes B recommend
circuit with an external L-C filter at input
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]