LANEW3 Datasheet, PDF (1/4 Pages) Wall Industries,Inc. – 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range

LANEW3 Series
3 Watt DC/DC Converter
Single and Dual Outputs
2:1 Wide Input Voltage Range
FEATURES
● Low Ripple & Noise
● 3 Watts Output Power
● Single and Dual Output
● External ON/OFF Control
● RoHS Directive Compliant
● 2:1 Wide Input Voltage Range
● UL94-V0 Case Potting Materials
● Continuous Short Circuit Protection
● Input to Output Isolation up to 1KVDC
● SIP Package: 0.86 x 0.36 x 0.44 Inches
UL
TUV
CB
CE MARK
(Pending)
SPECIFICATIONS: LANEW3 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
5V nominal input
12V nominal input
24V nominal input
48V nominal input
4.5 – 9 VDC
9 – 18 VDC
18 – 36 VDC
36 – 75 VDC
Input Current
See Table
Input Filter
Capacitor Type
Input Voltage Variation
Input Surge Voltage (100ms max)
Input Reflected Ripple Current
Start Up Time
(Nominal Vin and constant resistive Load)
dv/dt
5V nominal input
12V nominal input
24V nominal input
48V nominal input
5V nominal input
12V nominal input
24V nominal input
48V nominal input
Power Up
Remote ON/OFF
DC-DC ON
DC-DC OFF
5V/ms, max
(Complies with ETS300 132 part 4.4)
15 VDC
36 VDC
50 VDC
100 VDC
400mAp-p
150mAp-p
380mVp-p
170mVp-p
1ms typ
1ms typ
Open or high impedance
Control pin applied current
4 ~ 8mA max (via 1KΩ)
Remote OFF Input Current (nominal input)
1mA max
Remote ON/OFF
Application Circuit
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy (Full load and nominal Vin)
Line Regulation (Low line to high line at full load)
Load Regulation
Cross Regulation (Dual)
Minimum Load (See Note 3)
Single Output (min. load to 100% load)
Dual Output (balanced on all outputs)
Asymmetrical load 25% / 100% FL
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
See Table
±1%
±0.2%
±0.5%
±1%
±5%
See Table