HA10-2N4RM Datasheet, PDF (8/9 Pages) Vishay Siliconix – Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-Polar

www.vishay.com
PERFORMANCE AND RELIABILITY
The capacitors are tested in accordance with
MIL-PRF-49137, with specific requirements as follows:
Temperature Stability: When tested per MIL-PRF-49137/6,
capacitance shall be within ± 15 % at - 55 °C and 85 °C, and
± 10 % at 25 °C after exposure to temperature extremes. DF
shall be within 200 % of initial limit at - 55 °C, 150 % of initial
limit at 85 °C, and meet the initial at 25 °C. DCL shall be
within 10 x initial limit at 85 °C, and meet the initial limit at
25 °C.
Moisture Resistance: (per Method 106 of MIL-STD-202)
After 10 cycles of 24 h at 25 °C to 65 °C and 80 % to 98 %
RH; capacitance shall be within ± 15 % of initial value, DF
within 1.5 x initial limit and leakage within 3 x initial limit.
Life: (per Method 108 of MIL-STD-202) after 1000 h at 85 °C
and rated voltage; capacitance shall be within ± 10 % of
initial limit, DF within initial limits, and leakage within 200 %
of initial limit.
Surge Voltage: (per MIL-PRF-49317) After 1000 cycles at
85 °C and 1.3 x V_DC; capacitance shall be within ± 10 % of
initial limit, DF and leakage within initial limits.
Resistance to Soldering Heat: (per Method 210 0f
MIL-STD-202, Condition B) After immersion in 260 °C
molten solder to within a 1/4" of the body of the unit, there
shall be no evidence of mechanical or electrical
degradation.
Solderability: (per Method 208 of MIL-STD-202) After
dipping leads in 235 °C molten solder to within 0.125" of the
body of the unit, the solder shall cover 95 % of the lead
surface.
Terminal Strength: (per Method 211 of MIL-STD-202) After
the following test there shall be no loosening of the terminals
or permanent damage to the terminals. Test Condition A:
(Pull Test) 0.010" leads withstand 1 pound, 0.016" leads 2
pounds and 0.007" leads 1/2 pound. Test Condition C:
(Bend Test) All leads shall withstand 3° to 90° bends with a
1/2 pound applied force.
CAPACITANCE VS. TEMPERATURE
+ 10
+5
0
-5
- 10
- 40
100 ^{μF - 10 V}
SPECIFICA ^TION
(MFDSP-EVC_{DIFCIC)1A0T0IOμFN- 10 V}
TYPICAL
1
μH
-
20
V
- 10
+ 25
+ 85 + 100
TEMPERATURE °C
HA
Vishay Sprague
IMPEDANCE VS. FREQUENCY
10K
5K
(MFD - V_DC)
2K
1K
500
200
100
50
20
10
5.0
4.74.μ70F.μ000F-..4000027-4.40.07017μ44V0μF7μ7FVFμ-μ-F3F-35-5-520V2V00VVV
2.0
1.0
4.7 _{μF - 20 V}
0.5
0.2
0.1
100 500 1 2 5 10 20 50 100 500 1 2 5 10
Hz
kHz FREQUENCY kHz
MHz
LEAKAGE CURRENT VS. TEMPERATURE
1.0
(MFD - V_DC)
1 μF - 20 V
100 μF - 10 V
0.1
0.01
- 40
- 10
0 + 20
+ 85
TEMPERATURE °C
Revision: 05-Dec-07
8
Document Number: 43003
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000