ACAS0606 Datasheet, PDF (6/8 Pages) Vishay Siliconix – Precision Thin Film Chip Resistor Array Superior Moisture Resistivity

ACAS 0606 AT, ACAS 0612 AT - Precision
Precision Thin Film Chip Resistor Array
Superior Moisture Resistivity
Vishay Beyschlag
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
EN 60115-1, Generic specification
EN 140400, Sectional specification
EN 140401-801, Detail specification
The testing also covers most of the requirements specified
by EIA/IS-703 and JIS-C-5202.
The tests are are carried out under standard atmospheric
conditions according to IEC 60068-1 ⁽¹⁾, 5.3. Climatic
category LCT/UCT/56 (rated temperature range: Lower
Category Temperature, Upper Category Temperature; damp
heat, long term, 56 days) is valid (LCT = - 55 °C/UCT =
125 °C).
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar)
The requirements stated in the “Test Procedures and
Requirements” table are based on the required tests and
permitted limits of EN 140401-801 where applicable.
TEST PROCEDURES AND REQUIREMENTS
EN
60 115-1
CLAUSE
IEC
60068-2 ⁽¹⁾
TEST
METHOD
TEST
PROCEDURE
Stability for product types:
4.5
4.8.4.2
4.25.1
ACAS 0606 AT
ACAS 0612 AT
-
Resistance
-
-
Temperature coefficient
At (20/- 55/ 20) °C and
(20/125/20) °C
Endurance at 70 °C:
Standard operation mode
-
Endurance at 70 °C:
Power operation mode
U = P₇₀ x R
or U = U_max.;
1.5 h on; 0.5 h off;
1000 h:
Absolute
Relative ⁽³⁾
8000 h:
Absolute
Relative ⁽³⁾
U = P₇₀ x R
or U = U_max.;
1.5 h on; 0.5 h off;
1000 h:
Absolute
Relative ⁽³⁾
8000 h:
Absolute
Relative ⁽³⁾
4.25.3
-
Endurance at upper
category temperature
125 °C; 1000 h:
Absolute
Relative ⁽³⁾
125 °C; 8000 h:
Absolute
Relative ⁽³⁾
155 °C; 1000 h:
Absolute
Relative ⁽³⁾
REQUIREMENTS ⁽²⁾
PERMISSIBLE CHANGE (ΔR)
47 Ω to 150 kΩ
47 Ω to 150 kΩ
± 0.5 % R; ± 0.25 % R
± 50 ppm/K; ± 25 ppm/K
± (0.1 % R + 0.05 Ω)
0.1 % R + 0.05 Ω
± (0.25 % R + 0.05 Ω)
0.25 % R + 0.05 Ω
± (0.25 % R + 0.05 Ω)
0.25 % R + 0.05 Ω
± (0.5 % R + 0.05 Ω)
0.5 % R + 0.05 Ω
± (0.25 % R + 0.05 Ω)
0.25 % R + 0.05 Ω)
± (0.5 % R + 0.05 Ω)
0.5 % R + 0.05 Ω
± (0.4 % R + 0.05 Ω)
0.4 % R + 0.05 Ω
Document Number: 28770
Revision: 06-Nov-09
For technical questions, contact: [e-mail]
www.vishay.com
281