VS-ST380CH Datasheet, PDF (5/8 Pages) Vishay Siliconix – Metal case with ceramic insulator

www.vishay.com
12000
11000
10000
At Any Rated Load Condition And With
Rated V_RRM Applied Following Surge.
Initial T_J= 150°C
@60 Hz 0.0083 s
@50 Hz 0.0100 s
9000
8000
7000
6000 ST380CH..C Series
5000
1
10
100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
10000
T_J = 25°C
1000
VS-ST380CH Series
Vishay Semiconductors
13000
Maximum Non Repetitive Surge Current
12000
VersusPulse Train Duration. Control
Of Conduc tion May Not Be Maintained.
11000
Initial T_J = 150°C
No Voltage Reapplied
10000
Rated V_RRMReapplied
9000
8000
7000
6000 ST380CH..C Series
5000
0.01
0.1
1
Pulse Train Duration (s)
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
T_J = 150°C
ST380CH..C Series
100
0.5 1 1.5 2 2.5 3 3.5
InstantaneousOn-state Voltage (V)
Fig. 9 - On-State Voltage Drop Characteristics
0.1
ST380CH..C Series
0.01
Steady State Value
R _thJ-hs = 0.09 K/ W
(Single Side Cooled)
R _thJ-hs = 0.04 K/ W
(Double Side Cooled)
(DC Operation)
0.001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 10 - Thermal Impedance Z_thJ-hs Characteristics
Revision: 20-Dec-13
5
Document Number: 94411
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000