VS-ST180S12P0V Datasheet, PDF (5/8 Pages) Vishay Siliconix – Phase Control Thyristors (Stud Version), 200 A

www.vishay.com
4800
4400
4000
At Any Rated Load Condition And With
Rated V_RRM Applied Following Surge.
Initial T_J= 125°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
3600
3200
2800
2400 _ST180SSeries
2000
1
10
100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
10000
T_J = 25°C
1000
VS-ST180SPbF Series
Vishay Semiconductors
5500
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
5000 _{Of Conduction May Not Be Maintained.}
4500
Initial T_J = 125°C
No Voltage Reapplied
4000
Rated V_RRMReapplied
3500
3000
2500
ST180SSeries
2000
0.01
0.1
1
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
T_J = 125°C
ST180SSeries
100
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
InstantaneousOn-state Voltage (V)
Fig. 7 - On-State Voltage Drop Characteristics
1
Steady State Value
R_thJC = 0.105 K/ W
(DC Operation)
0.1
0.01
ST180S Series
0.001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance Z_thJC Characteristics
Revision: 11-Mar-14
5
Document Number: 94397
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000