STE470-75T3MI Datasheet, PDF (5/6 Pages) Vishay Siliconix – SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal

www.vishay.com
STE
Vishay
MECHANICAL CHARACTERISTICS
ITEM
CONDITION
Shock (Specified Pulse)
MIL-STD-202, method 213, condition I
(100 g)
Vibration, High Frequency
MIL-STD-202, method 204, condition E
(20 g peak)
Thermal Shock
MIL-STD-202, method 107, condition A
Solderability
Terminal Strength
MIL-STD-202, method 208,
ANSI/J-STD-002, test A
MIL-STD-202, method 211
Resistance to Solder Heat MIL-STD-202, method 210, condition C
Terminals
MIL-STD-1276
Marking
MIL-STD-1285
COMMENTS
The capacitors shall meet the requirements of MIL-PRF-39006.
The capacitors shall meet the requirements of MIL-PRF-39006.
Thermal shock shall be in accordance with MIL-PRF-39006 when
tested for 30 cycles.
Solderability shall be in accordance with MIL-PRF-39006.
Terminal strength shall be in accordance with MIL-PRF-39006.
The capacitors shall meet the requirements of MIL-PRF-39006.
Terminals shall be as specified in MIL-STD-1276. The length and
diameter of the terminals shall be as specified in Dimensions table.
All terminals shall be permanently secured internally and
externally, as applicable. All external joints shall be welded.
Marking of capacitors conforms to method I of MIL-STD-1285 and
include capacitance (in μF), capacitance tolerance letter, rated
voltage, date code, lot symbol and Vishay trademark.
SELECTOR GUIDES
Tantalum Selector Guide
Parameter Comparison Guide
www.vishay.com/doc?49054
www.vishay.com/doc?42088
Revision: 07-Nov-14
5
Document Number: 43009
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000