STE470-75T3MI Datasheet, PDF (1/6 Pages) Vishay Siliconix – SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal

www.vishay.com
STE
Vishay
SuperTan^® Extended (STE) Capacitors,
Wet Tantalum Capacitors with Hermetic Seal
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Capacitance Tolerance: at 120 Hz, +25 °C.
± 20 % standard. ± 10 % available as special.
FEATURES
Vishay SuperTan^® Extended (STE) represents a
major breakthrough in wet tantalum capacitor
technology. Its unique cathode system, also used
Available
in the ST, provides the highest capacitance per
Available
unit volume available. The STE combines the
inherent reliability of wet tantalum with the capacitance
stability of solid tantalum, and there are no circuit
impedance restrictions. The range is exceptionally well
suited for low voltage filtering and energy storage
applications. Ideal for designs targeting the military and
aerospace industry.
The SuperTan^® Extended (STE) is housed in an all tantalum,
hermetically sealed case and is manufactured to withstand
high stress and hazardous environments.
• Axial through-hole terminations: standard tin / lead (Sn /
Pb) 100 % tin (RoHS-compliant) available
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings tables.
Life Test: capacitors are capable of withstanding a 2000 h
life test at a temperature of +85 °C at the applicable rated
DC working voltage.
ORDERING INFORMATION
STE
6000
16
TYPE CAPACITANCE DC VOLTAGE RATING
μF
AT +85 °C
T4
CASE SIZE
M
CAPACITANCE
TOLERANCE
I
INSULATING
SLEEVE
E3
RoHS COMPLIANT
M = ± 20 %
K = ± 10 %
I = insulated
X = uninsulated
E3 = 100 % tin termination
(RoHS compliant)
Blank = SnPb termination
(standard design)
Note
• Packaging: the use of formed plastic trays for packaging this type of axial lead component is standard.
Tape and reel is not recommended due to the unit weight.
Revision: 07-Nov-14
1
Document Number: 43009
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000