PR01000104708JR500 Datasheet, PDF (5/16 Pages) Vishay Siliconix – Power Metal Film Leaded Resistors

PR01/02/03
Vishay BCcomponents ^{Power Metal Film Leaded Resistors}
MASS PER UNIT
TYPE
PR01 Cu 0.6 mm
PR01 FeCu 0.6 mm
PR02 Cu 0.8 mm
PR02 FeCu 0.6 mm
PR02 FeCu 0.8 mm
PR03 Cu 0.8 mm
PR03 FeCu 0.6 mm
PR03 FeCu 0.8 mm
MASS
(mg)
212
207
504
455
496
1192
1079
1185
MARKING
The nominal resistance and tolerance are marked on the
resistor using four or five colored bands in accordance with
IEC 60062, marking codes for resistors and capacitors.
OUTLINES
The length of the body (L₁) is measured by inserting the
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (IEC 60294).
MOUNTING
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
MOUNTING PITCH
TYPE
LEAD STYLE
Straight leads
PR01
Radial taped
Double kink large pitch
Double kink small pitch
Straight leads
PR02
Radial taped
Double kink large pitch
Double kink small pitch
Straight leads
PR03 Double kink large pitch
Double kink small pitch
Note
(1) _{Recommended minimum value}
PITCH
mm
e
12.5 ⁽¹⁾
5 ⁽¹⁾
4.8
2
17.8
7
12.5
5
15.0 ⁽¹⁾
6 ⁽¹⁾
4.8
2
17.8
7
15.0
6
23.0 ⁽¹⁾
9 ⁽¹⁾
25.4
10
20.0
8
FUNCTIONAL DESCRIPTION
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the E96/E24 series for resistors with a tolerance of ± 1 % or ± 5 %.
The values of the E96/E24 series are in accordance with IEC 60063.
FUNCTIONAL PERFORMANCE
1.00
P
(W)
0.75
T_amb = 40 °C
0.50
0.25
70 °C
100 °C
125 °C
155 °C
3.00
P
(W)
2.25
1.50
0.75
Tamb ^{= 40 °C}
70 °C
100 °C
125 °C
155 °C
1001000000h0 ^h
T_m (°C)
>
< ^<301kk_ΩΩ
30 _kΩ
205 °C
101000100000000hhh
> ^≤_515<1k1Ω^kkΩΩ
250 °C
Tm ^(°C)
10 5.0
2.0 1.0 0.5 0.2 0.1 % ΔR
PR01 Drift nomogram
2.00
P
(W)
1.50
1.00
0.50
T_amb = 40 °C _{70 °C}
100 °C
125 °C
155 °C
100
000 ^h
10
000 ^h
1000
h
T_m (°C)
> ^<393<9k1_Ω^kkΩΩ
220 °C
10 5.0 2.0 1.0 0.5 0.2 0.1 % ΔR
PR03 Drift nomogram
Note
• The maximum permissible hot-spot temperature is 205 °C for
PR01, 220 °C for PR02 and 250 °C for PR03
10 5.0
2.0 1.0 0.5 0.2 0.1 % ΔR
PR02 Drift nomogram
www.vishay.com
114
For technical questions, contact: [e-mail]
Document Number: 28729
Revision: 14-Oct-09