PACKAGIN Datasheet, PDF (5/9 Pages) Vishay Siliconix – Packaging Information

www.vishay.com
DIMENSIONS in millimeters (inches)
Packaging Information
Vishay General Semiconductor
32.0 (1.26)
23.0 (0.905)
7.35 (0.29)
5.35 (0.21)
5.68 (0.224)
12.0 MAX. 4.68 (0.184)
(0.472) ^{(Center to Center)}
12.7 (0.50)
(Nominal)
(Center to Center)
6.5 MAX.
(0.256)
1.0 MAX. ⁽²⁾
(0.40)
± 1.0 ⁽²⁾
(± 0.039)
2.72 (0.107)
2.03 (0.080)
Body DIA.
20.5
18.5
(0.807)
(0.728)
11.0
MAX.
(0.433)
2.5
MIN.
(0.098)
16.5 (0.650)
15.5 (0.610)
A ⁽¹⁾
0.6 MAX.
0.65 (0.0256)
0.55 (0.022)
(0.024)
Lead DIA.
B ⁽¹⁾
Tape
9.75 (0.384)
8.50 (0.335)
0.6 (0.025)
0.4 (0.016)
Note:
(1) _Measurement
difference between
leads, A and B =
0.4 (0.016) MAX.
(2) _Component
Alignment
4.3 (0.169)
3.7 (0.146)
DIA.
19.0 (0.748)
17.5 (0.689)
4.55 (0.179)
3.15 (0.124)
(Center to Center)
13.0 (0.512)
12.4 (0.488)
13.5 (0.531)
12.5 (0.492)
User Direction Feed
Available for GP10 Products only Utilizing 0.65 mm (0.025") Diameter Leads for
Euroform tape by adding suffix “E” (GP10GE, 1N4004GPE). Lead coating is standard.
Fig. 3 - Euroform
32.0 (1.26)
23.0 (0.905)
16.0 MIN.
(0.630)
11.0
MAX.
(0.433)
5.68 (0.224)
4.68 (0.184)
(Center to Center)
5.5 MIN.
(0.217)
16.5 (0.650)
Tape 15.5 (0.610)
12.7 (0.50)
(Nominal)
(Center to Center)
6.5 MAX.
(0.256)
1.0 MAX. ⁽¹⁾
(0.40)
7.0 MIN.
(0.276)
1.3 MIN.
(0.059)
9.75 (0.384)
8.50 (0.335)
± 1.0 ⁽¹⁾
(± 0.039)
2.72 (0.107)
2.03 (0.080)
Body DIA.
0.86 (0.034)
0.55 (0.022)
Lead DIA.
0.6 (0.025)
0.4 (0.016)
Note:
(1) _{Component Alignment}
4.55 (0.179)
3.15 (0.124)
(Center to Center)
4.3 (0.169)
3.7 (0.146)
DIA.
13.0 (0.512)
12.4 (0.488)
Fig. 4 - Panasert
19.0 (0.748)
17.5 (0.689)
User Direction Feed
Revision: 01-Feb-13
5
Document Number: 88869
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000