VS-VSUD360CW40 Datasheet, PDF (4/6 Pages) Vishay Siliconix – Designed and qualified for industrial level

www.vishay.com
VS-VSUD360CW40
Vishay Semiconductors
I_F
0
(3)
t_rr
t_a
t_b
(2) _IRRM
(4)
Q_rr
0.5 I_RRM
dI_(rec)M/dt ⁽⁵⁾
(1) ^dIF^/dt
0.75 I_RRM
(1) dI_F/dt - rate of change of current
through zero crossing
(4) Q_rr - area under curve defined by t_rr
and I_RRM
(2) I_RRM - peak reverse recovery current
(3) t_rr - reverse recovery time measured
from zero crossing point of negative
going I_F to point where a line passing
through 0.75 I_RRM and 0.50 I_RRM
extrapolated to zero current.
Q_rr =
t_rr x I_RRM
2
(5) dI_(rec)M/dt - peak rate of change of
current during t_b portion of t_rr
Fig. 7 - Reverse Recovery Waveform and Definitions
ORDERING INFORMATION TABLE
Device code VS-VS UD 360 C W 40
CIRCUIT CONFIGURATION
CIRCUIT
Two diodes common cathode
Dimensions
1
2
3
4
5
6
1 - Vishay Semiconductors product
2 - Type of device: UD = FRED Pt^®
3 - Current rating (360 = 360 A)
4 - Circuit configuration:
C = common cathode
5 - Type of device:
W = TO-244 wire bondable not insulated
6 - Voltage rating (40 = 400 V)
CIRCUIT
CONFIGURATION CODE
C
CIRCUIT DRAWING
Lug
terminal
anode 2
Lug
terminal
anode 1
Base common
cathode
LINKS TO RELATED DOCUMENTS
www.vishay.com/doc?95021
Revision: 03-Nov-16
4
Document Number: 93116
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000