VS-40TPS16PBF_15 Datasheet, PDF (4/9 Pages) Vishay Siliconix – Thyristor High Voltage, Phase Control SCR

www.vishay.com
450
At any rated load condition and with
rated V_RRM applied following surge.
400
Initial T_J = 150 °C
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
350
300
250
VS-40TPS.. Series
200
1
10
100
Number of Equal Amplitude Half Cycle
Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
100
VS-40TPS16PbF, VS-40TPS16-M3
Vishay Semiconductors
550
Maximum non-repetitive surge current
500
versus pulse train duration.
Initial T_J = 150 °C
450
No voltage reapplied
Rated V_RRM reapplied
400
350
300
250
200 _{VS-40TPS.. Series}
150
0.01
0.1
1
10
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
10
T_J= 25°C
T_J= 125°C
40TPS.. Series
1
0.5
1
1.5
2
Instantaneous On-state Voltag e (V)
Fig. 7 - On-State Voltage Drop Characteristics
100
Rec tangular gate pulse
a)Rec ommended load line for
rated di/ dt: 20 V, 30 ohms
tr = 0.5 µs, tp >= 6 µs
b)Rec ommended load line for
<= 30%rated di/ dt: 20 V, 65 ohms
10 tr = 1 µs, tp >= 6 µs
(a)
(b)
(1) PGM = 100 W, tp = 500 µs
(2) PGM = 50 W, tp = 1 ms
(3) PGM = 20 W, tp = 25 ms
(4) PGM = 10 W, tp = 5 ms
1
VGD
IGD
0.1
0.001
0.01
(4) (3) (2) (1)
40TPS..
Frequenc y Limited by PG(AV)
0.1
1
10
100
1000
Instantaneous Gate Current (A)
Fig. 8 - Gate Characteristics
Revision: 06-Feb-14
4
Document Number: 94389
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000