MDP01 Datasheet, PDF (4/5 Pages) Vishay Siliconix – Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics

MDP 01, 03, 05
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
Vishay Dale
16 Pin Package
3.00
14 Pin Package
2.70
0.380
Single Resistor
03
0.190
01 and 05
- 50
+ 25
Derating
+ 70
+ 125 + 150
Ambient Temperature °C
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
CONDITIONS
1.5 rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours
± 4 hours at + 25 °C ambient temperature
5 cycles between - 65 °C and + 125 °C
Short Time Overload
2.5 x rated working voltage 5 seconds
Low Temperature Operation
45 minutes at full rated working voltage at - 65 °C
Moisture Resistance
Resistance to Soldering Heat
Shock
240 hours with humidity ranging from 80 % RH to 98 % RH
Leads immersed in + 350 °C solder to within 1/16" of device body for
3 seconds
Total of 18 shocks at 100 G's
Vibration
Load Life
Terminal Strength
12 hours at maximum of 20 G's between 10 and 2000 Hz
1000 hours at + 70 °C, rated power applied 1.5 hours “ON, 0.5 hour “OFF”
for full 1000 hour period. Derated according to the curve.
4.5 pound pull for 30 seconds
Insulation Resistance
10 000 Megohm (minimum)
Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 minute)
MAX. ΔR
(Typical Test Lots)
± 0.50 % ΔR
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 1.00 % ΔR
± 0.25 % ΔR
-
-
Document Number: 31511
Revision: 28-Jul-06
For technical questions contact: [e-mail]
www.vishay.com
4