English
Language : 

MDP01 Datasheet, PDF (3/5 Pages) Vishay Siliconix – Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics
MDP 01, 03, 05
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
IMPEDANCE CODES
CODE
R1(Ω)
500B
82
750B
120
800C
130
990A
160
101C
180
111C
180
121B
180
121C
220
131A
220
R2(Ω)
130
200
210
260
240
270
390
270
330
CODE
141A
181A
191A
221B
281B
381B
501C
102A
202B
R1(Ω)
270
330
330
330
560
560
620
1.5K
3K
R2(Ω)
270
390
470
680
560
1.2K
2.7K
3.3K
6.2K
CIRCUIT APPLICATIONS
01 SCHEMATIC
• • •• ••• •
Pin #1
MDP1401
MDP1601
03 SCHEMATIC
Pin #1
MDP1403
MDP1603
05 SCHEMATIC
R1 R1 R1 R1
R1 R1 R1
R2 R2 R2
R2 R2 R2 R2
R1 R1 R1 R1
R1 R1 R1
R2 R2 R2 R2
R2 R2 R2
Pin #1
MDP1405, MDP1605
Standard E-24 resistance values stocked. Consult factory
13 and 15 resistors with one pin common
The MDPXX01 circuit provides a choice of 13 and 15 nominally equal
resistors, each connected between a common pin (14 and 16) and a
discrete PC board pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down
• TTL Input Pull-down
• Open Collector Pull-up
• Digital Pulse Squaring
• "Wired OR" Pull-up
• TTL Unused Gate Pull-up
• Power Driven Pull-up
• High Speed Parallel Pull-up
7 and 8 isolated resistors
The MDPXX03 provides a choice of 7 and 8 nominally equal resistors,
each resistor isolated from all others and wired directly across.
Commonly used in the following applications:
• "Wired OR" Pull-up
• Long-line Impedance Balancing
• Power Driven Pull-up
• LED Current Limiting
• Powergate Pull-up
• ECL Output Pull-down
• Line Termination
• TTL Input Pull-down
TTL dual-line terminator; pulse squaring
The MDPXX05 circuit contains 12 and 14 series pair of resistors.
Each series pair is connected between ground and a common line.
The junction of these resistor pairs is connected to the input terminals.
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
www.vishay.com
3
For technical questions contact: ff2aresistors@vishay.com
Document Number: 31511
Revision: 28-Jul-06