152D685X9015A2T Datasheet, PDF (4/5 Pages) Vishay Siliconix – Solid-Electrolyte TANTALEX® Capacitors, Extended Capacitance Values, Hermetically-Sealed

www.vishay.com
152D
Vishay Sprague
STANDARD REEL PACKAGING SPECIFICATIONS - MEETS EIA STANDARD RS-296 in inches [millimeters]
13.0 [330.2]
“A”
Standard reel
1.126 to 3.07
[28.6 to 78.0]
I. D. reel hub
0.625 ± 0.0062 dia.
[15.88 ± 1.575]
Thru hole
Label (4. a)
“A”
1.374 to 3.626
[34.9 to 92.1]
0.750 [19.05]
Section “A” to “A”
Tape spacing
B
Component
spacing
A
0.031 [0.79] max.
Off center (1. a)
0.125 [3.18] max.
0.250 [6.35] (3. b)
0.031 [0.79] (3. f)
Both sides (3. f)
CASE
CODE
A
B
R
S
TYPE 150D UNITS WITH
INSULATING SLEEVE
D
L
0.135 ± 0.016 0.286 ± 0.031
[3.43 ± 0.41]
[7.26 ± 0.79]
0.185 ± 0.016 0.474 ± 0.031
[4.70 ± 0.41] [12.04 ± 0.79]
0.289 ± 0.016 0.686 ± 0.031
[7.34 ± 0.41] [17.42 ± 0.79]
0.351 ± 0.016 0.786 ± 0.031
[8.92 ± 0.41] [19.96 ± 0.79]
LEAD SIZE
AWG NO.
24
24
22
22
NOM. DIA.
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
COMPONENT
SPACING
A
0.200 ± 0.015
[5.08 ± 0.38]
0.200 ± 0.015
[5.08 ± 0.38]
0.400 ± 0.015
[10.16 ± 0.38]
0.400 ± 0.015
[10.16 ± 0.38]
TAPE SPACING
B
2.500 ± 0.062
[63.5 ± 1.57]
2.500 ± 0.062
[63.5 ± 1.57]
2.875 ± 0.062
[73.03 ± 1.57]
2.875 ± 0.062
[73.03 ± 1.57]
UNITS
PER REEL
1000
1000
500
500
STANDARD REEL PACKAGING INFORMATION
1. Component Leads
a. Component leads shall not be bent beyond 0.047"
[1.19 mm] maximum from their nominal position when
measured from the leading edge of the component lead
at the lead egress from the component.
b. The “C” dimension shall be governed by the overall
length of the reel packaged component. The distance
between flanges shall be 0.125" to 0.250" [3.18 mm to
6.35 mm] greater than the overall component length.
2. Orientation
All polarized components must be oriented to one
direction. The cathode lead tape shall be a color and the
anode lead tape shall be white.
3. Reeling
a. Components on any reel shall not represent more than
two date codes when date code identification is required.
b. Component leads shall be positioned between pairs of
0.250" [6.35 mm] tape.
c. The disposable reels have hubs and corrugated
fibreboard flanges and core or equivalent.
d. A minimum of 12.0" [304.8 mm] leader of tape shall be
provided before the first and after the last component on
the reel.
e. 50 lb or 60 lb. Kraft paper must be wound between layer
of components as far as necessary for component
protection. Width of paper to be 0.062" to 0.250"
[1.57 mm to 6.35 mm] less than the “C” dimension
of the reel.
f. A row of components must be centered between tapes
± 0.047" [1.19 mm]. In addition, individual components
may deviate from center of component row ± 0.031"
[0.79 mm].
g. Staples shall not be used for splicing. Not more than
4 layers of tape shall be used in any splice area and no
tape shall be offset from another by more than 0.031"
[0.79 mm] non-cumulative. Tape splices shall overlap at
least 6.0" [152.4 mm] for butt joints and at least 3.0"
[76.2 mm] for lap joints and shall not be weaker than
unspliced tape. Universal splicing clips may also be used.
h. Quantity per reel shall be controlled so that tape
components and cover shall not extend beyond the
smallest dimension of the flange (either across flats or
diameter). Once the quantity per reel for each part
number has been established, future orders for that part
number shall be packaged in that quantity. When order or
release quantity is less than the established quantity, a
standard commercial pack is to be used.
i. A maximum of 0.25 % of the components per reel
quantity may be missing without consecutive missing
components.
j. Adequate protection must be provided to prevent
physical damage to both reel and components during
shipment and storage.
4. Marking
Minimum reel and carton marking shall consist of the
following: Customer part number, purchase order no.,
quantity, package date, manufacturer’s name, electrical
value, date code, Vishay Sprague part number and
country of origin.
Revision: 09-Mar-12
4
Document Number: 40016
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000