152D685X9015A2T Datasheet, PDF (1/5 Pages) Vishay Siliconix – Solid-Electrolyte TANTALEX® Capacitors, Extended Capacitance Values, Hermetically-Sealed

www.vishay.com
152D
Vishay Sprague
Solid-Electrolyte TANTALEX^® Capacitors,
Extended Capacitance Values, Hermetically-Sealed
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C
± 20 % and ± 10 % standard. ± 5 % available as special
Dissipation Factor: At 120 Hz, + 25 °C
Dissipation factor, as determined from the expression
2fRC, shall not exceed the values listed in the Standard
Ratings table
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings table
FEATURES
• Axial through-hole terminatons: Tin/lead
(SnPb), 100 % tin (RoHS compliant)
• High capacitance and small size
• Exceptional operating stability
• Hermetically-sealed, cylindrical, metal-case
• Low leakage current and low dissipation
factor
• The military equivalent to the 152D is the CSR23 which is
qualified to MIL-C-39003/03
• Provide proven reliability in a wide variety of high
performance military, industrial and commercial markets
• Material categorization: For definitions please see
www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings table
At + 125 °C: Leakage shall not exceed 12 times the values
listed in the Standard Ratings table
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 2000 h or derated DC voltage applied
at + 125 °C for 1000 h
Following the life test:
1. DCL shall not exceed 125 % of the initial requirement. In
no case need the leakage current be less than 2 µA
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 5 %
ORDERING INFORMATION
152D
106
X0
006
MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING
TOLERANCE
AT 85 °C
A
CASE
CODE
2
STYLE
NUMBER
T
PACKAGING
E3
RoHS
COMPLIANT
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 % *
* Special order
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating.
See
Ratings
and Case
Codes
table
2 = Insulated
sleeve
T = Tape
and reel
E3 = 100 % tin
termination
(RoHS compliant)
Blank = SnPb
termination
DIMENSIONS in inches [millimeters]
1.500 ± 0.250
[38.10 ± 6.35]
1.500 ± 0.250
[38.10 ± 6.35]
D
dia.
L
Positive lead
-
+
Solid tinned
nickel leads
J max.
0.047 [1.19] max.
0.125 [3.18] max.
CASE CODE
D
L
WITH INSULATING SLEEVE ⁽¹⁾
J
(MAXIMUM)
A
0.135 ± 0.016 [3.43 ± 0.41] 0.286 ± 0.031 [7.26 ± 0.79] 0.422 [10.72]
B
0.185 ± 0.016 [4.70 ± 0.41] 0.474 ± 0.031 [12.04 ± 0.79] 0.610 [15.49]
R
0.289 ± 0.016 [7.34 ± 0.41] 0.686 ± 0.031 [17.42 ± 0.79] 0.822 [20.88]
S
0.351 ± 0.016 [8.92 ± 0.41] 0.786 ± 0.031 [19.96 ± 0.79] 0.922 [23.42]
Note
(1) _{When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body}
LEAD SIZE
AWG NO.
NOMINAL DIAMETER
24
0.020 [0.51]
24
0.020 [0.51]
22
0.025 [0.64]
22
0.025 [0.64]
Revision: 09-Mar-12
1
Document Number: 40016
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000