VS-ST1280C04K0 Datasheet, PDF (3/9 Pages) Vishay Siliconix – Phase Control Thyristors

www.vishay.com
TRIGGERING
PARAMETER
Maximum peak gate power
Maximum average gate power
Maximum peak positive gate current
Maximum peak positive gate voltage
Maximum peak negative gate voltage
DC gate current required to trigger
DC gate voltage required to trigger
DC gate current not to trigger
DC gate voltage not to trigger
VS-ST1280C..K Series
Vishay Semiconductors
SYMBOL
P_GM
P_G(AV)
I_GM
+ V_GM
- V_GM
I_GT
V_GT
TEST CONDITIONS
T_J = T_J maximum, t_p ≤ 5 ms
T_J = T_J maximum, f = 50 Hz, d% = 50
T_J = T_J maximum, t_p ≤ 5 ms
T_J = -40 °C
T_J = 25 °C
T_J = 125 °C
T_J = -40 °C
T_J = 25 °C
T_J = 125 °C
Maximum required gate trigger/
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
VALUES
UNITS
typ. max.
16
W
3
3.0
A
20
V
5.0
200 -
100 200 mA
50 -
1.4 -
1.1 3.0 V
0.9 -
I_GD
Maximum gate current/voltage
not to trigger is the maximum
10
mA
T_J = T_J maximum value which will not trigger any
V_GD
unit with rated V_DRM anode to
cathode applied
0.25
V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum operating temperature range
Maximum storage temperature range
Maximum thermal resistance, junction to
heatsink
T_J
T_Stg
R_thJ-hs
DC operation single side cooled
DC operation double side cooled
Maximum thermal resistance, case to heatsink
R_thC-hs
DC operation single side cooled
DC operation double side cooled
Mounting force, ± 10 %
Approximate weight
Case style
See dimensions - link at the end of datasheet
VALUES UNITS
-40 to 125
°C
-40 to 150
0.042
0.021
K/W
0.006
0.003
24 500
N
(2500)
(kg)
425
g
A-24 (K-PUK)
ΔR_thJC CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
TEST CONDITIONS
180°
0.003
0.003
0.002
0.002
120°
0.004
0.004
0.004
0.004
90°
0.005
0.005
0.005
0.005
T_J = T_J maximum
60°
0.007
0.007
0.007
0.007
30°
0.012
0.012
0.012
0.012
Note
• The table above shows the increment of thermal resistance R_thJC when devices operate at different conduction angles than DC
UNITS
K/W
Revision: 18-Dec-13
3
Document Number: 93718
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000